Sub-Zero 700TFI Integrated Use & Care Guide - Page 14

Freezer Storage, Integrated Use & Care

Page 14 highlights

Integrated Use & Care 14 Freezer Storage FREEZER DRAWER (MODEL IC-27FI) Column model IC-27FI has three wire storage drawers. The drawer front panel is clear so you can easily view the contents. Be sure to unload the freezer drawers before removal. To remove a freezer drawer pull it out until it stops. Behind the bottom two corners of the front face of the drawer are metal tabs. Pull these tabs toward the front of the drawer and lift and rotate the drawer up. Refer to the illustration below. IMPORTANT NOTE: If the door is limited to a 90° door opening, the shallow door shelves will need to be removed from the bottom of the door in order to remove a drawer. To reinstall, push the drawer slides back into the freezer. Align the drawer with the slides and push the drawer straight back onto the slides until it stops. Press downward on the front of the drawer to engage the drawer tabs with the slides. ICE CONTAINER (MODEL IC-27FI) The automatic ice maker and ice container of column model IC-27FI are located in the top drawer. To remove the ice container, pull the drawer forward until it stops and lift the ice container out. TAB Freezer drawer (IC-27FI).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

ICE CONTAINER (MODEL IC-27FI)
The automatic ice maker and ice container of column
model IC-27FI are located in the top drawer. To remove
the ice container, pull the drawer forward until it stops and
lift the ice container out.
Freezer Storage
FREEZER DRAWER (MODEL IC-27FI)
Column model IC-27FI has three wire storage drawers.
The drawer front panel is clear so you can easily view the
contents. Be sure to unload the freezer drawers before
removal.
To remove a freezer drawer pull it out until it stops. Behind
the bottom two corners of the front face of the drawer are
metal tabs. Pull these tabs toward the front of the drawer
and lift and rotate the drawer up. Refer to the illustration
below.
IMPORTANT NOTE:
If the door is limited to a 90° door
opening, the shallow door shelves will need to be removed
from the bottom of the door in order to remove a drawer.
To reinstall, push the drawer slides back into the freezer.
Align the drawer with the slides and push the drawer
straight back onto the slides until it stops. Press down-
ward on the front of the drawer to engage the drawer tabs
with the slides.
Integrated Use & Care
14
TAB
Freezer drawer (IC-27FI).