Sub-Zero BI-36UFD Sub-Zero Design Guide - Page 29

Built-In Refrigeration, Side Panels

Get Sub-Zero BI-36UFD PDF manuals and user guides View all Sub-Zero BI-36UFD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Built-In Refrigeration 29 subzero.com/specs Side Panels Side panels can be used with every design application. When planning for side panels with the installation of a built-in model, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel may vary. IMPORTANT NOTE: The use of side panels may change the width of your rough opening. The side panel will need to be a minimum of 24" (610) deep and 1/2" (13) thick. Refer to the illustrations below for side panel dimensions. Routing will be necessary so that the side panel fits flush against the side of the unit. IMPORTANT NOTE: If you have a model BI-30U, BI-30UG, BI-36U, BI-36UG or BI-36UFD, extra routing will be necessary to prevent the panel from hitting the refrigerator lower hinge plate. When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are also available through your authorized Sub-Zero dealer. 24" (610) FRONT OF SIDE PANEL 1" (25) 17/8" (48) ROUT TO 1/8" (3) 17/8"(48) 1" (25) 84" (2134) 1/8" (3) 1/2" (13) MAIN SIDE PANEL FRAME ROUTING 41/4" (108) ROUT TO 3/16" (5) (OVER-AND-UNDER MODELS) 5 3/4" (146) 201/2" (521) 4" (102) OPTIONAL TOE KICK CUT-OUT 2 5/8" (67) Side panel dimensions. Routing detail.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Built-In Refrigeration
29
subzero.com/specs
Routing detail.
MAIN
FRAME
SIDE PANEL
ROUTING
1"
(25)
1
7
/
8
"
(48)
1
/
8
"
(3)
1
/
2
"
(13)
Side Panels
Side panels can be used with every design application.
When planning for side panels with the installation of a
built-in model, you need to be aware of the space configu-
ration to achieve a pleasing fit. Depending on the exact
panel you are using with your unit, the height of the panel
may vary.
IMPORTANT NOTE:
The use of side panels may change
the width of your rough opening.
The side panel will need to be a minimum of 24"
(610)
deep
and
1
/
2
"
(13)
thick. Refer to the illustrations below for side
panel dimensions. Routing will be necessary so that the
side panel fits flush against the side of the unit.
84"
(2134)
24"
(610)
ROUT TO
3
/
16
"
(5)
(OVER-AND-UNDER
MODELS)
OPTIONAL
TOE KICK
CUT-OUT
4"
(102)
20
1
/
2
"
(521)
5
3
/
4
"
(146)
1
7
/
8
"
(48)
1"
(25)
4
1
/
4
"
(108)
ROUT TO
1
/
8
"
(3)
FRONT
OF SIDE
PANEL
2
5
/
8
"
(67)
Side panel dimensions.
IMPORTANT NOTE:
If you have a model BI-30U, BI-30UG,
BI-36U, BI-36UG or BI-36UFD, extra routing will be neces-
sary to prevent the panel from hitting the refrigerator lower
hinge plate.
When installing a built-in unit with a custom side panel, an
accessory kit is required. Stainless steel and white enamel
side panels are also available through your authorized
Sub-Zero dealer.