Sub-Zero BI-42UFD Advanced Design - Extended Height Grille
Sub-Zero BI-42UFD Manual
View all Sub-Zero BI-42UFD manuals
Add to My Manuals
Save this manual to your list of manuals |
Sub-Zero BI-42UFD manual content summary:
- Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 1
DESIGN & INSTALLATION GUIDE Extended Height Grille for Built-In - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 2
of the designer to specify panel support components suitable for this use and the installer to use proper workmanship during construction. Sub-Zero cannot be liable for custom applications beyond its control. IMPORTANT NOTE: Throughout this guide, dimensions in parentheses are millimeters unless - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 3
Extended Height Grille Built-In Design Options OVERLAY FLUSH INSET 3 subzero.com/specs OVERLAY PANELS To coordinate with the decor, custom panels are designed to overlay the grille and doors of the built-in unit. These custom panels can be combined with unique hardware for design flexibility. - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 4
for at least 1/2" (13) space on all four sides of the grille panel for proper air flow to the refrigeration system. For overlay models, this is behind the outer grille frame. For flush inset models, this is around the sides, top and bottom of the decorative grille panel. SIDE VIEW Space must be - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 5
SIDE VIEW A 1/4" (6) thick functional panel must be installed in the inner grille frame (the part that flips up) to prevent warm air discharge from short-circuiting back into the system. Use sizing for the 'backer panel' found in the panel configurator or Sub-Zero design guide. 5 subzero.com/specs - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 6
INSTALL CLEAT HINGING FOR DECORATIVE GRILLE PANEL 11/2" (38) 1/2" (13) LIP HINGING FOR DECORATIVE GRILLE PANEL 2" (51) CLEAT END VIEW GRILLE CLEARANCE REQUIRED FOR SERVICE IMPORTANT NOTE: In the event that refrigeration components must be removed for service, the standard grille frame will need - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 7
Extended Height Grille Grille Hinging System INSTALL CLEAT AND CATCH CL 7 subzero.com/specs INSTALL CATCH CLEAT 3" (76) DECORATIVE GRILLE the cleat to extend through when the decorative grille panel is closed. Install a customer-supplied catch between the back of the decorative grille panel and - Sub-Zero BI-42UFD | Advanced Design - Extended Height Grille - Page 8
SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 1/2012
DESIGN & INSTALLATION GUIDE
Extended Height Grille for Built-In