Sub-Zero IT-36CIID Integrated Use & Care Guide - Page 13
Cleaning
View all Sub-Zero IT-36CIID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CARE RECOMMENDATIONS Cleaning INTERIOR CLEANING To clean interior surfaces and all removable parts, wash with a mild solution of soap, water and baking soda. Rinse and dry thoroughly. Avoid getting water on lights and control panel. CAUTION Do not use vinegar, rubbing alcohol or other alcoholbased cleaners on any interior surface. STAINLESS STEEL EXTERIOR Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural luster, lightly wipe surface with a water-dampened microfiber cloth followed by a dry polishing chamois. Always follow the grain of stainless steel. CONDENSER CLEANING CAUTION Before cleaning the condenser, turn power off at the control panel. Wear gloves to avoid injury from sharp condenser fins. The condenser is located behind the grille. Remove the kickplate by extracting the two mounting screws. Refer to the illustration below. Use a soft bristle brush and vacuum to remove dust and lint from the condenser. Clean the condenser every three to six months. IMPORTANT NOTE: To avoid damaging condenser fins, vacuum in the direction of the fins. CAUTION Failure to clean the condenser could result in temperature loss, mechanical failure or damage. VACATIONS For extended vacations, turn power off at the control panel. Empty the unit and block doors open slightly to let fresh air in and keep interior dry. Water filter should be replaced before start up. CONDENSER SCREW Condenser location. subzero.com | 13