Sub-Zero PRO 48 PRO 48 Use & Care Guide - Page 9
PRO 48 Use & Care, Freezer Storage, Storage Drawers - refrigerator freezer - stainless steel
View all Sub-Zero PRO 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PRO 48 Use & Care subzero.com Freezer Storage ADJUSTABLE SHELVES The adjustable shelves of the PRO 48 upper freezer compartment are cantilevered and 100% stainless steel. The freezer shelves are repositioned the same way as the glass shelves in the refrigerator compartment. To remove or adjust the freezer shelves, first tilt the shelf up at the front, then lift it up and out of the tracks on the rear wall of the freezer. To replace a shelf, insert in the tracks on the rear wall of the freezer with the front of the shelf raised slightly. As you push the shelf in, lower the front of the shelf until it locks into position. ICE BUCKET REMOVAL The automatic ice maker and stainless steel ice bucket are located in the lower freezer drawer. To remove the ice bucket, pull the freezer drawer out until it stops, lift the ice bucket up and out of the drawer. The entire lower freezer drawer can now be used for more ice storage if necessary. Storage Drawers DRAWER REMOVAL The refrigerator and freezer storage drawers are removable for cleaning. The drawers have an automatic stop built in to prevent drawers from coming all the way out of the unit. To remove, pull the drawer all the way out until it stops, lift up evenly on both sides of the drawer front and pull out. To reinstall, raise the front of the drawer and place onto the drawer slide tracks. Be sure to engage the front of the drawer slide with the drawer assembly. Refer to the illustration below. IMPORTANT NOTE: To reduce the weight of the drawer, be sure to unload the contents before removing the drawer. Storage drawers are heavy. Be sure to keep your feet clear as you remove the drawer. Storage drawer removal.