Symphonic BL519DD Owner's Manual - Page 13

TV SECTION SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. CHANNEL SET UP FOR THE FIRST TIME TV 1 Plug in the TV/DVD power cord Plug the TV/DVD power cord into a standard AC outlet. NOTE: • If some digits appear in the corner of the screen, press POWER without unplugging the power cord. 2 Turn on the TV/DVD Press POWER to turn on the TV/DVD. 3 Select the On Screen Language Press K or L to point to "LANGUAGE". - SET UP - B LANGUAGE [ENGLISH] ESP FRA AUTO PRESET Then, press ENTER to select "ENGLISH" or "ESP"=Spanish or "FRA" =French. "[ ]" indicate the selected language. 4 Begin auto preset - SET UP - Press K or L to point to "AUTO PRESET". Then, press ENTER. The tuner scans and memorizes all LANGUAGE [ENGLISH] ESP FRA B AUTO PRESET active channels in your area. NOTES: • The TV/DVD distinguishes between standard TV channels and cable(CATV) channels. • The TV/DVD may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO PRESET action again when reception conditions are better. See "CHAN- NEL SET UP AGAIN" on page 14. 5 After scanning The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with Number or CHANNEL(CH.) K or L. DELETING (OR ADDING) CHANNEL TV The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) 1 Select "CHANNEL SET UP" - TV SETUP - Press SETUP on the remote control. B CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] Press K or L to point to "CHAN- CAPTION [OFF] NEL SET UP". Then, press ENTER. 2 Select "ADD/DELETE CH" Press K or L to point to "ADD/DELETE CH". Then, press ENTER. - CHANNEL SET UP - B ADD / DELETE CH (TV) AUTO PRESET 3 Enter the desired channel number Press K or L until your desired channel number appears. (You can also use Number or CH. K/L to enter it.) (Example: CH8) 08 ADD / DELETE 4 Delete (or add) it from (into) memory Press ENTER. The channel number changes to light red. The channel is deleted from memory. Added channel: Light blue. Deleted channel: Light red. • To delete another channel, repeat steps [3] and [4]. • If you press ENTER again, the channel is memo- rized again. 5 Exit the channel setup mode Press SETUP on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press CHANNEL(CH.) K or L. - 13 - EN 0C28