Symphonic CD5800 Owner's Manual - Page 7
Preparation
View all Symphonic CD5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PREPARATION 1 Turn off the CD player and the amplifier. 1 2 Connect one end of the supplied audio cable to the CD changer's L (Left) and R (Right) LINE OUT jacks, matching the red plug to the red R jack and the white plug to the white L jack. 3 Connect the other end of the cable to the receiver/amplifier s corresponding left and right CD, AUX, or TAPE input jacks. 4 Plug the CD Changer's power cord into a standard AC outlet. INSTALLING THE BATTERIES Your CD changer's remote control requires two AA batteries for power. 1 Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2 Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. re e Notes: Turn off the power to the components when connecting or disconnecting the audio connection cable. Do not connect CD Changer to the Phono input jack of the stereo amplifier. 3 Replace the cover. Cautions: • Use only batteries of the recommended size and type. Other batteries might damage the remote control. Never leave dead or weak batteries in the remote control. They can leak chemicals and corrode the control. aoo n) AC WALL OUTLET OUT UT R L CD CHANGER BACK OF AMPLIFIER [FIG.4] 7 EN 8E29