Symphonic CSDV840E Owner's Manual - Page 11

VCR Functions Playback Before: Turn on the TV and set it to channel 3. • If channel 3 is already occupied for broad- casting, see "RF Output Channel" section. VCR VCR 1 2 Remote Control TV Screen 2 PLAYB PLAY 3 STOP STOP 4 OPEN/CLOSE /EJECT EJECT A 4 1 POWER SPEED OPEN/CLOSE AUDIO /EJECT 1 2 4 5 7 8 0 DISPLAY VCR 3 SKIP/CH. 6 VCR/TV 9 SLOW +10 DVD PAUSE VIDEO POWER AUDIO REW F.FWD STOP/EJECT PLAY TIMER REC REC /OTR PLAY STOP 3 REC/OTR 32 4 Hint • When a tape without record tab is inserted, the OPEN/CLOSE DVD/VCR will start V playback automati- CHANNEL cally. • Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press the CHANNEL buttons. VCR Functions Recording & OTR (One Touch Recording) Before: Turn on the TV and set it to channel 3. • If channel 3 is already occupied for broadcasting, see "RF Output Channel" section. VCR 1 with tab VCR 2 1 2 4 5 7 8 0 Remote Control TV Screen 3 SKIP/CH. 6 9 CH12 • Select the desired channel 3 SP SPEED Tape Speed Type of tape SP mode SLP mode 4 REC/OTR • Select the desired tape speed T60 1hour 3hour Recording/Playback Time T120 T160 2hours 2-2/3hours 6hour 8hour REC You can select a fixed recording time by pressing the REC/OTR button repeatedly. 2 5 4 36 POWER SPEED OPEN/CLOSE AUDIO /EJECT 1 2 4 5 7 8 0 DISPLAY VCR 3 SKIP/CH. 6 VCR/TV 9 SLOW +10 DVD PAUSE REC/OTR PLAY STOP MENU ENTER SETUP TOP MENU RETURN 1 VIDEO POWER AUDIO REW F.FWD STOP/EJECT PLAY TIMER REC REC /OTR 54 6 Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later, cover the hole with cellophane tape. Record tab Hint 2 • To view one channel while recording another 1) While you are recording on the DVD/VCR, press OPEN/CLO the VCR/TV button. 2) At the cable box CHANNEL or satellite box, select the channel you want to view. • If you have connected the DVD/VCR to a cable box or satellite box, refer to "Hint for Cable Box or Satellite Box" section on page 6. REC OTR(0:30) (Normal recording) OTR(1:00)..... You CAN NOT copy a DVD to a videotape. 5 STOP OTR(8:00) STOP OTR(7:30) 6 OPEN/CLOSE /EJECT EJECT A To stop recording temporarily (Pause mode) Press the PAUSE/STILL button. • During the rec-pause mode, five C marks appear on the TV screen. Each C mark represents one minute. • Press it again to resume recording. Other Operations To cue or review picture during playback (Picture Search) Press the F.FWD or REW button. • Press it again and the DVD/VCR will search in super high speed. (in the LP/SLP modes only) To freeze the picture on TV screen during playback (Still mode) Press the PAUSE/STILL button. Each time you press the button, the picture will be forwarded by one frame. • If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the CHANNEL buttons. • If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped. Counter Reset Press the CLEAR/C.RESET button. To play back in slow motion Press the SLOW button during playback or the still mode. • If the noise bars appear on the TV screen, you can reduce it by pressing the CHANNEL buttons. Auto Rewind When a tape reaches its end during playback, fast-forward, or recording (except timer recording and One Touch Recording), the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape. - 11 - Hint • Still/Slow/Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head. • To return to playback from the Picture Search/Still/ Slow mode, press the PLAY button. EN