Symphonic CST427G Owner's Manual - Page 2

PREPARATION FOR USE CONNECTIONS Plug the incoming cable into the ANT. IN jack on the rear of the TV. Cable TV signal OR Antenna Rear of this TV Incoming cable from home Antenna / Cable Company (No Cable Box) Cable Box or Satellite Box* OR OUT IN ANT.. IN Incoming cable from Cable Company or Satellite Antenna *Cables not included *Note (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. Note: • For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. You can enter into Video mode from Game mode by adjusting a Picture control. 1 To use external input 2 To cancel Game mode only GAME MENU GAME [-] GAME MODE [+] VOL OFF ON Picture: GAME Input: External (front/rear) Select "PICTURE" After 10 seconds VIDEO Picture: Customized Input: External 3 To return to TV channel GAME 15 2 times INSTALLING THE BATTERIES 1 2 3 Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. [EXTERNAL CONNECTION] Rear AUDIO/VIDEO INPUT ex. Video Cable (OUT) Audio Cable Video Cassette Recorder (OUT) (IN) (IN) Rear of this TV VIDEO L AUDIO R IN ANT.. IN Note: ● The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. Front AUDIO/VIDEO INPUT ex. Video Camera Video Game Video Cable (OUT) Audio Cable (OUT) Front of this TV (IN) VIDEO L - AUDIO - R (IN) Note: ● Front input jack is given priority over the rear input jack. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. OPERATIONS REMOTE CONTROL AND FRONT PANEL FUNCTION IR transmitter To send infrared ray (IR) signal POWER button To turn TV on/off Channel number buttons Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. CH(ANNEL) K / L buttons To select channels and move up/down through menu items POWER 1 2 4 5 7 8 0 GAME SLEEP DISPLAY 3 6 CHANNEL RETURN 9 +100 CH VOL VOL CH GAME button Press to set the Game mode SLEEP button To set Sleep Timer DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return previous channel MENU MENU button To view on-screen menu MUTE MUTE button To mute sound VOL(UME) K / L buttons To adjust volume To decide the command of settings SELECTING AUDIO/VIDEO INPUT You can select external input jacks by pressing [GAME] on the remote control. 1 To use external input 2 To return to TV channel Note: ● You can test if the remote control sends out the infrared signal with an AM radio. (Refer to "TROUBLESHOOTING GUIDE".) GAME 15 GAME GAME Picture: GAME Input: External (front/rear) In the Game mode, you can use front or rear input jacks with suitable picture adjustments for video games. Notes: ● If you press [GAME] when the TV is off, the TV turns on and enters in Game mode. ● If you adjust another picture control while in Game mode, this mode will automatically be canceled. VIDEO L - AUDIO - R HEADPHONE MENU Y VOLUME X L CHANNEL K POWER VIDEO L - AUDIO - R HEADPHONE MENU Y VOLUME X L CHANNEL K POWER Infrared Sensor Window POWER button CHANNEL ▲/▼ buttons VOLUME m/n buttons MENU button HEADPHONE jack AUDIO L/R input jacks VIDEO input jack Note: ● If some digits appear in the corner of the screen when the unit is turned on at the first time, press [POWER] without unplugging the power cord.