Symphonic RSMSD520FE Owner's Manual - Page 15
Tv Operation
View all Symphonic RSMSD520FE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TV OPERATION WATCHING A TV PROGRAM TV 1 Turn on the TV/DVD Press POWER to turn on the TV/DVD. 2 Select the channel number Press CHANNEL(CH.) K/L to select your desired channel number or press the number buttons. Notes for using the number buttons on the remote control: • You must precede single-digit channel numbers with a zero (Example: 02 ... 09). • When selecting cable channels which are higher than 99, press +100 first, then press the last two digits. (Example: to select channel 125, first press +100, then press 2 and 5). Remember: ¡If the TV/DVD is connected to a cable box or satellite box, the TV/DVD must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box. 3 Adjust sound Press VOLUME(VOL.) X/Y to adjust the volume. VOLUME 20 CCC CCCCCCCCCCCCC NOTE: • If you press CHANNEL(CH.) K/L in the DVD mode, you can change the TV channels. Even if you turn off the TV/DVD in the DVD mode, when you turn it on again, it will go into the TV mode. DEGAUSSING Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes. PICTURE CONTROL TV The TV/DVD's picture controls - BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS - are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image. Make sure ... • TV/DVD power must be turned on. 1 Select "PICTURE CONTROL" Press PICTURE on the remote control. 2 Select item you want to adjust Press Arrow (K/L) until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS BRIGHT - PPPPPPPCPPPPPPP+ 3 Adjust the picture control Press Arrow (s / B) to adjust to your desired level within 5 seconds. NOTE: • At step [3], the picture adjustment display will dis- appear from the TV screen after about 5 seconds unless you press any buttons, even though you may not be finished. In this case, repeat from step [1]. BRIGHT CONTRAST COLOR TINT SHAPNESS Arrow Button { to decrease brightness Arrow Button B to increase brightness to decrease contrast to pale to purple to soft to increase contrast to brilliant to green to clear • If there is a power failure of any kind, the unit will retain its memory for this feature. - 15 - EN 0C28