Symphonic SC313B Owner's Manual - Page 21

3 Begin OTR Press the REC/OTR button on the OTR(2 : 30) TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you SP press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours. Push(es) 1 push 2 pushes 3 pushes Display Recording length (normal recording) 0:30 30 minutes 1:00 60 minutes Avoid over lap of programs ... There is a chance that a program will not be recorded. when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. Recording Sequence Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM 9:00AM 10:00AM 11:00AM 12:00PM *Recording period is SHADED 17 pushes 8:00 480 minutes TIMER RECORDING You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 6th, 2001 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure ... • If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. • Clock must be set to the correct time and date before setting the timer. • TV/VCR power must be turn on to program it. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) • The channel you want to record is properly set in advance. • The illustration below demonstrates the sequence of recordings. 1 Select "TIMER PROGRAM- - M E N U - MING" Press the MENU button on the remote control. Confirm "TIMER PROGRAM- B TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH MING" is pointed by pressing the PLAY/K button. And press the F.FWD/B button. • If you have not yet set the clock, "MANUAL CLOCK SET" appears. If so, fol- - TIMER PROGRAMMING - low stops [3] to [8] on page 15. Then set the timer recording. 2 Select your desired program CH DATE BEGIN END - - - B -- - - - - position (1~8) Press the PLAY/K or STOP/L button to select the desired program position. Then, press the F.FWD/B button. - TIMER PROGRAMMING - CH DATE BEGIN END B 61 3 Set the channel number Press the PLAY/K or STOP/L button until the desired channel number appears. (Example: CH61) Then, press the F.FWD/B button. Remember: If the TV/VCR is con- nected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. - TIMER PROGRAMMING - CH DATE BEGIN END B 61 7/06 FRI 4 Select once, every day or weekly recording For once recording : - 21 - - TIMER PROGRAMMING - CH DATE BEGIN END B 61 EVRY DAY EN 9I03