Symphonic SC3819 Owner's Manual - Page 27
Return, Timer
View all Symphonic SC3819 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
TO CHECK THE BEGIN/END TIME 1) Press the POWER button so that the REC indicator goes off. 2) Press the MENU button. 3) Confirm "TIMER PROGRAMMING" is pointed. 4) Press the F.FWD/1110- button. The details of programs appear on the TV screen. 5) Press the MENU button to return to TV mode. HINTSFOR AUTOMATIC TIMER RECORDING • Make sure the channel you want to record is properly set in advance. • It is not necessary to press the RECORD button for timer recording. • Recording begins automatically at the Start time. • If you are recording using a Timer mode, you may not operate the unit manually. • The erase-prevention tab on the cassette must be in place (or you must put tape over the hole). • If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off. • If the tape runs out before the end time, the TVNCR will switch to the Stop mode immediately, and the tape will be ejected. AUTO RETURN • With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically. • Use the remote control for this procedure. 1 Select "USER'S SET UP" Press the MENU button. Press the PLAY/A or STOP/V button to point to "USER'S SET UP". Then, press the F.FWD/1- button. -MENUP. ULSCCPZTTAIEEIHASHMCNRTPAEETEGTTONRURISIUNNOSRREAPEGENESARGLTCCERO(ESUCLCTCGEROA(UNHTRENCPTPNAUKTRMGPIOCLMLOISINNHG( 2 Set "AUTO RETURN" to [ON] Press the PLAY/A or STOP/V button to point to "AUTO RETURN". Press the F.FWDAP or REW/1 button until [ON] appears. - USERS SET UP P. RRAEEUPNTOETAARTLEPTLUARYN 44 3 Auto Return will begin When all the timer recordings are completed, the TVNCR will rewind to the beginning of the recorded program(s). NOTE: • If you press the POWER button while tape is rewinding, the Auto Return will stop. 4 Watch the recorded program Press the PLAY button. TO CANCEL THE AUTO RETURN MODE Repeat steps [1] and [2], select [OFF] using the F.FWDA0- or REW/-4 button. If there is a power failure of any kind, the unit will retain its' memory for this feature. WAKE LP TIMER The Wake Up Timer function turns on the TVNCR without using the POWER button after a desired period of time. NOTES: • Use the remote control for this procedure. • Clock must be set to the correct time before setting the timer. • If you want to select [TAPE], you must insert a cassette tape in the TVNCR. The tape will start playback automatically on your desired time. 1 Select "WAKE UP TIMER" Press the WAKE UP/SLEEP button once, and confirm "ON/OFF" is pointed. Press the F.FWD/Ilio. or REW/-4 button until [ON] appears. WTIMAKEERUP P.CTTIVMI/TNEAOPESWP.A=NIN 2 Select "TV" or "TAPE" Press the PLAY/A or STOP/V button until to point to "TV/TAPE". Press the F.FWD/110- or REW/All button, and select [TV] or [TAPE]. IIMPRIXvIS.4%,,N. T/JIAI;KFERLP 090,E TP/r - 26 - EN 71,01