Symphonic SE436J Owner's Manual - Page 36
and/or
View all Symphonic SE436J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
T U L SHO TING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to remedy the problem. SYMPTOM No power. POSSIBLE CAUSE • Power cord is not connected. CORRECTIVE ACTION • Connect power cord to AC outlet. • The VCR power is turned off. • Press POWER button to turn on the VCR. Timer recording is not • The timer recording is set • Set the timer recording correctly. possible. incorrectly. • The VCR power is turned on. • Press POWER button to turn off the VCR. • VCR clock is not set correctly. • Set VCR clock correctly. Recording mode cannot • The erase prevention tab on cassette • Place a plastic tape over the hole. be engaged. is missing. No picture or poor picture on playback. • The TV and/or VCR is in the TV mode. • Set your TV to the VCR mode and/or press TV/VCR button so that the TV/VCR indicator on the VCR comes on. • The TV fine tuning is not set • Fine tune your TV. correctly. Noise in picture on play- • Video heads are dirty. back. • Head cleaning is necessary, consult the nearest Funai Authorized Service Center. Playback picture is par- • The tracking control is not set • Adjust tracking control for a better tially noisy. correctly. picture using CHANNEL A or v button. See page 18. On-thkair TV programs cannot' be seen. --_;,,. • • Connections are not correctly made. • The TV and/or VCR is in VCR mode. • Re-check the ANT. IN and ANT. OUT connections. See pages 9-10. • Set yourTV to the TV mode and/or press TV/VCR button so that the TV/VCR indicator on the VCR disappears. No operation by infrared • Weak batteries. Remote Control. • Check the batteries in the remote control. - 36 - EN 6Al2