Symphonic SL220A Owner's Manual - Page 14
CHANNEL, Automatic
View all Symphonic SL220A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
SET UP FOR USE You can program the tuner to scan only the channels you receive in your area. NOTES: • Channel memory programming is NOT needed when connected to a cable box or satellite box as in Fig 4 on page 11 or Fig 5 on pagel2. In this case with your remote,select the VCR to channel 3 or 4 the same channel as located on the back of VCR (CH3 or CH4). Then the channel you wish to record or view may be selected on the cable box or satellite box. • Follow the steps below once. Repeat it only if there is a power failure or if the VCR is unplugged for more than 30 seconds. (In these cases, the programmed channels are erased.) • You must follow the steps below before attempting to play or record a video tape. If you want to play or record a video tape BEFORE programming the tuner, you must first turn off the VCR. Then, press the POWER button again to turn it back on. To program the tuner again, see "CHANNEL SET UP AGAIN" on page 16. 3 Turn on the VCR Press the POWER button to turn on the VCR. Both the POWER indicator and the VCR/TV indicator on the VCR come on. 4 Select "ENCit.Pti or "ESPAhOL" Select "ENGLISH" or "ESPANOL"=Spanish using the PLAY/A or STOP/V button. Then, press the F.FWD40- button. LANGUAGE SELECT ► ENGLISH ESPANOL [ON] Note: This function effects only the language on the screen menu and not the audio source. jin channel preset Press the F.FWD/IP- button once. The tuner scans and memorizes all active channels in your area. • 1I we AUTO SET UP rim O. • The VCR distinguishes between standard TV channels and cable channels. CHANNEL SET UP (Automatic) 1 «'iug in the VCk power (...c Plug the VCR power cord into a standard AC outlet. After scar. : The tuner stops on the lowest memorized channel. The TV screen returns to TV mode. CH 01 Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have the CH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select the Box to the channel you wish to view or record. MINT* channel 3 t r4oni .eT. Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV. CH3 CH4 co [Back of the VCR] • If "AUTO SET UP" appears on the TV screen again, check the cable connections. Press the F.FWD/P0button once again and the VCR will begin preset again. TO SELECT A DESIRED CHANNEL You can select the desired channel by using the CHANNEL • or V button or directly pressing number buttons on the remote control. Note for using number buttons: • When selecting cable channels which are higher than 99, press the +100 button first, then press the last two digits. (Example: to select channel 125, first press the +100 button then press "2" and "5"). • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). - 14- EN 9H02