Symphonic SL2820 Owner's Manual - Page 19
Special, Playback
View all Symphonic SL2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SPECIAL PLAYBACK • Use the remote control for the following procedure. • The POWER and the VCR/TV indicator must be turned on the VCR. • Turn on the TV and set the TV to channel 4-4 CH3 CH4 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel [Back of selected on the TV. the VCR] AUTO REPEAT PLAYBACK RENTAL PLAYBACK The VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. Make sure to insert a prerecorded tape. This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. • Selecting ON or OFF must be done during playback. I Select "VCR SET UP" Press the MENU button until the VCR SET UP menu appears. VCR SET UP AUTOREPEAT RENTAL AUTO RETURN 2 Select "AUTO REPEAT" Confirm "AUTO REPEAT" is pointed to. I Insert rental tape into VCR Begin playback. 2 Select "VCR SET UP" Press the MENU button until the VCR SET UP menu appears. -tax•ekeNtAX, VCR SETUP AUTO REPEAT -. RENTAL AUTO RETURN 3 Begin Auto repeat playback Press the F.FWD/lio• button so that [ON] will appear next to "AUTO REPEAT" on the TV screen. When in Stop mode, Repeat playback mode will start automatically. When in Play mode, press the. RESET/EXIT button to start Repeat playback mode. • You may also select Auto Repeat play mode by pressing the AUTO REPEAT button on the remote control. • Once you select the Auto Repeat mode, it stays in effect even after you turn off the VCR. • The COUNTER MEMORY button does not function if the Auto Repeat mode is set to [ON]. In this case, set the Auto Repeat mode to [OFF]. • To stop playback, press the STOP button. 3 Select "RENTAL" Press the PLAY/A or STOP/V button to point to "RENTAL". 4 Select "RENTAL" to (ON) Press the F.FWD/10- button so that "RENTAL ON" appears. • You may also set the Rental mode to ON or OFF by pressing the RENTAL SELECTOR button on the remote control during playback. • Once you select the Rental mode, it stays in effect even after you turn off the VCR. • To stop playback, press the STOP button. TO EXIT THE RENTAL PLAY MODE TO EXIT THE AUTO REPEAT MODE • Repeat steps [1] to [2], and press the F.FWD/110- button. [ON] will then disappear from the menu. Then, press the RESET/EXIT button to return to TV mode. • Or, press the AUTO REPEAT button again. Power failure: If there is a power failure for more than 30 second, Auto Repeat Playback will go to off. • Repeat steps [1] to [3], and press the F.FWD/Iiii- button so that "RENTAL OFF" appears. • Or, press the RENTAL SELECTOR button during playback so that "RENTAL OFF" appears on the TV screen. Power failure: If there is a power failure for more than 30 second, Rental Playback will go to off. - 19 - EN 7I26