Symphonic TVCR9G1 Owner's Manual - Page 24
Automatic, Timer, Recording
View all Symphonic TVCR9G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
TIMER AUTOMATIC TIMER RECORDING You may set the TVNCR to record while you are away. You can set 8 programs to record on a specific day, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: MAY 6th, 1997 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: LP NOTES: • You must use the remote control for this procedure. • If a cable box or satellite box is connected with the TVNCR you will be limited to record only one channel. And the channel selector on the TVNCR must be selected to the output channel of the boxes 3 or 4 and then the actual channel to be recorded must be selected on the boxes. Make sure ... • Be sure the clock is set to the correct time and date before setting the timer. • Power must be turn on to set automatic timer recording. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which.you want to begin recording.) • The channel you want to record is properly set in advance. (See page 13) Avoid over lap ofprograms ... There is a case that a program will not be performed. when programs overlap; • The program that the start time is set earlier has priority. • When the earliest program has finished and the programs which should start still overlap, the recording will start in order of the program number. • If you programmed as the illustration, the timer re- cording would be carried out as follows (shaded part is the carried period) : 9:00AM - 10:00AMfor PROGRAM 2 10:00AM - for PROGRAM 1 Program 1 Program 2 Program 3 9:00AM 10:00AM 11:00AM 1 Select "TIMER PROGRAMMING" Press MENU button. Confirm "TIMER PROGRAM- -MERC- MING" is pointed. And press F.FWD/11, - button. • If you did not set the clock, K. TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK GNAWS- SET UP UZaI SmS07IUEPNOUoil LARG ,c(32i1164 I /CM1 "MANUAL CLOCK SET TING" appears. If so, follow page 15 to set the clock and repeat from step [3]. • 2 Select your desired program number (1-8) Press PLAY/A or STOP/V but- - TIMER PROGRAMMING - C. DATE START END ton repeatedly to select your de- sired program. • And press F.FWD/I10- button. 3 Set the channel number Press PLAY/A or STOP/V button repeatedly until your desired channel number appears. (Example: CH61) And press F.FWD/11,- button. - TIMER PROGRAMMING - CR CATS START EDD 4 Select once, every day or weekly recording For once recording : Press PLAY/A (up) button repeatedly until your desired date appears. (Example: "5/06" for May 6th) And press F.FWD/0- button. -TIMER PROGRAMMING - CH ERIE START END WOK SA6 NE .40 For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) - TIMER PROGRAMMING - Press STOP/V (down) button 04 DATE START END repeatedly until "EVERY :4 C31 DAY" appears. IKSR_ EVERY DAT And press F.FWD/IP button. For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday on channel 7at 5:00PM) Press STOP/V (down) button repeatedly until "EVERY" and your desired day of the week appear together. And press F.FWD/110 button. -TIMER PRCGRAMMING - CR SATE START END -01,--1 1- - 24 EN 7A08