Symphonic WSC3809 Owner's Manual - Page 21
Counter Memory, Search
View all Symphonic WSC3809 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
SEARCH Make sure ... TIME SEARCH • You must use the remote control for the following steps. • Power must be turned on. • Insert a tape. The Time Search function makes it possible to quickly advance the tape to your desired position from any position by entering the exact amount of playback time of the part that you want to skip. NOTES: COUNTER MEMORY • Time Search is set up to 9 hours 50 minutes (9:50) by 10 minutes at a time . This feature can be used to memorize a beginning point that you want to review. And you can search it easily by rewinding or fast forwarding. • This function is not operative in recording mode. • Counter Memory function is not operative in this mode. NOTE: • If the All Repeat or Blank Repeat is set to [ON], the Counter Memory function does not work. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. • This function is not operative when a cassette tape is not inserted in the TVNCR. In the example below: To watch a program after 2 hour 50 minutes from present position to forward direction. 1 Select "TIME SEARCH" mode Press TIME SEARCH button 2 Reset the counter to 0:00:00 Press COUNTER RESET button repeatedly. 3 Select the Counter Memory mode Press COUNTER MEMORY button so that "MEMORY" appears on the display. MEMORY COO 00 4 Begin recording or playback Press RECORD or PLAY button. OR Press MENU button. Press PLAY/A or STOP/V button repeatedly to point to "TIME SEARCH". Then, press F.FWD/100 button. -MENU- ' EIR AMOGPAM2A NG PIC11;AE CONTROL SETTING CLOCK CHANNEL KT UP USERS SET UP LANGUAGE IENGUSK: ► CAPTON TUJE SEAMCM 2 Enter your desired time Press PLAY/A or STOP/V button repeatedly until your desired time appears. (Example: "2:50" for 2 hours 50 minutes) TO* 5020104 2 50 m, Press STOP button when recording or playback is corn pleted. 3 Begin Time Search 5 To activate the Counter Memory Press REW (or F.FWD) button. The tape will automatically stop when the counter returns to 0:00:00. Press REW or F.FWD button. The tape will move to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TO CANCEL THE COUNTER MEMORY TO CANCEL THE TIME SEARCH First press COUNTER MEMORY to display the counter on the TVNCR screen. Then press COUNTER MEMORY continuously until "COUNT" appears. When the timer search mode is in progress, press STOP/EJECT button on the TVNCR or the remote control. This will delete the selected time. OR Before the timer search mode goes in progress, press the MENU button. - 21 - EN 8B26