TASCAM BB-800 : BB-800 Owners Manual - Page 18
Inserting and removing SD cards, Formatting an SD card
View all TASCAM BB-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3 - Preparation • When formatting, use the AC adaptor or batteries that have sufficient remaining charge. If the power turns OFF during formatting, formatting could fail. 1 Insert the SD card. 2 Press the HOME key to open the Home screen. NOTE In addition to during recording, this unit also writes information to the SD card when editing and setting marks, for example. When the write protection is engaged, this information cannot be written. Disengage the write-protect switch to enable these functions. Inserting and removing SD cards ªª Inserting SD cards Push an SD card in until it clicks fully into place. 3 Press the SD key (BB-1000CD only). The indicator above and to the left of the SD key lights. 4 Press the MENU key to open the MENU screen. 5 Use the DATA wheel or CURSOR [§/¶] keys to select MEDIA, and press the ENTER key. ªª Removing SD cards Press the inserted card in slightly to make it eject. NOTE Do not remove the SD card during recording or playback, or while the SD indicator is flashing (writing data). Formatting an SD card To use a new SD card or a card that has been formatted for another device or by a computer, we recommend that you format the card with this unit. Using an SD card formatted on another device or a computer could cause recording errors. CAUTION • Beware that formatting erases all the data on an SD card, including data written by other equipment. The MEDIA SD screen opens. 6 Use the DATA wheel or CURSOR [§/¶] keys to select FORMAT, and press the ENTER key. 7 The following confirmation screen appears. Press the F1 key to start formatting. When formatting completes, the MEDIA SD screen reopens. 18 TASCAM BB-1000CD/BB-800