TASCAM CD-400U Owners Manual English Espanol - Page 31

5 - Bluetooth device playback This unit can output sound from a computer, portable audio device or other equipment that supports Bluetooth (A2DP). Moreover, if the Bluetooth device supports AVRCP, the PLAY button and other controls on this unit can be used to control playback on the Bluetooth device. Pairing Follow the procedures below to enable communication with a Bluetooth device. NOTE Pairing also requires operation of the Bluetooth device. Refer to the operation manual of the Bluetooth device for procedures. 1. Select BLUETOOTH as the current source. (see "Selecting the playback source" on page 22) 2. Press and hold the main unit BACK [PAIRING] button or remote control DISPLAY/RDS/INFO [PAIRING] button. A PAIRING message will blink on the display. BLUETOOTH PAIRING 3. Enable Bluetooth transmission on the other Bluetooth device. 4. Select CD-400U (this unit) on the other Bluetooth device. When pairing succeeds, this unit and that device will be connected and Connected will appear on the Home Screen. BLUETOOTH Connected NOTE iiSome older Bluetooth devices require the input of a passkey. Enter 0000 in such cases. iiPairing will automatically end if connection is not confirmed within two minutes. iiWhen this unit is turned on, it will automatically try to con- nect with the Bluetooth device to which it was previously connected. At this time, pairing will automatically end after five minutes if connection is not possible because that Bluetooth device is not turned on or its Bluetooth function is turned off. Usable controls Controls on the main unit and included wireless remote control (RC-CD400) can be used to control the connected Bluetooth device if it supports AVRCP. Main unit PLAY button PAUSE button STOP button MULTI JOG dial turning m/, [FAST] buttons Remote control 7 button 9 button 8 button .// [l/;] buttons m/, buttons Function Play Pause Stop Selects tracks Search backward and forward CAUTION Operation might not occur properly depending on the connected Bluetooth device. Playback from a Bluetooth device. After pairing with the other Bluetooth device in advance, follow the procedures below for playback from it. 1. Select BLUETOOTH as the current source. (see "Selecting the playback source" on page 22) 2. Connect to CD-400U (this unit) on the other Bluetooth device. Connected appears on the Home Screen when connection completes. Controls on the main unit and included wireless remote control (RC-CD400) can be used to control the connected Bluetooth device, and this unit can output the playback sound from the Bluetooth device. Unpairing The Bluetooth device that is currently connected can be unpaired from the unit. 1. Select BLUETOOTH as the current source. (see "Selecting the playback source" on page 22) 2. Press the main unit BACK [PAIRING] button or remote control DISPLAY/RDS/INFO [PAIRING] button. A Disconnect? message will appear on the display. BLUETOOTH Disconnect? 3. Press the main unit MULTI JOG dial or remote control ENTER button to unpair the device. Press the main unit BACK [PAIRING] button or remote control CLEAR button to cancel unpairing. 4. After unpairing, the pairing operation will start. TASCAM CD-400U 31