TASCAM DA-3000 Product Spec Sheet - Page 2

DA-3000 Product Spec Sheet ・ Input level can be adjusted in 0.5dB step ・ Using automatic track incrementing function, new files can be created automatically while continuing to record when a condition (level, file size, digital input) set in advance occurs ・ Manual track incrementing function can be used whenever you like to create a new track while continuing to record ・ Automatic mark functions can be used to easily check problems (levels, word clock unlocking) detected during recording ・ File name format can be set to either a user-defined word or the date and time ・ Repeat playback function (all files or single file) ・ Folder playback function can be used to play all files in a folder ・ Playlist function allows files to be programmed in advance for playback ・ Divide and delete functions can be used to manage files that are already recorded ・ UNDO function can be used to cancel the previous operation ・ USB host port supports copying between USB flash drives and CF/SDHC cards ・ File names can be changed ・ Direct location possible when a USB keyboard is connected ・ Word clock master can be set to Internal, Word input or Digital inputs ・ Analog input and output reference levels can be set to -9/-14/-16/-18/-20dBFS ・ Digital input has a sampling rate converter (supports 32 to 216kHz) ・ Audio files prepared on a computer can be played back (if in a format supported for playback by this unit) ・ Oscillator function (440Hz, 1kHz, 10kHz) ・ Input monitoring function allows input signals to be output without recording ・ Updating is possible ・ EI core transformer used in power supply section ・ Dual mono circuits eliminate interference between left and right channels ・ Fully-balanced circuits realize low noise ・ 128x64 OEL display with a wide viewing angle ・ 24-dot stereo LED level meters with adjustable brightness make checking levels easy ・ TCXO with 1ppm precision ・ Backup memory stores settings even when the power is off ・ Fanless design eliminates unwanted noise ・ Aluminum front panel harmonizes with other studio equipments design ・ Operation possible using included RC-10 wireless remote control ・ Standard 1/4" headphones jack provides 45mW/ch output ・ USB port for USB keyboard (supports USB 1.1) ・ USB port for USB flash drive (supports USB 2.0) ・ XLR digital input/output (supports AES3-2003 and IEC60958-4:AES/EBU formats) ・ RCA Coaxial digital input/output (supports IEC60958-3:S/P DIF format) ・ BNC digital input/output for DSD (supports SDIF-3 and DSD-raw formats) ・ RCA analog unbalanced input/output ・ XLR analog balanced input/output ・ EIA 1U rackmount size ・ RoHS compliant ※ Don' t use a wireless remote controller when you use multiple units except using the cascade function. Please take 1U or more of blank space above the DA-3000 for ventilation. -2- TEAC CORPORATION