TASCAM DA-6400 IF-AN16/OUT Owners Manual - Page 7
Specifications, Ratings, Analog audio output ratings, Audio performance
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
*Pin assignments adhere to the TASCAM DB-25 Pinout Standard (AES59-2012) ANALOG OUT 1-8 OUT OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 9-16 OUT OUT 9 OUT 10 OUT 11 OUT 12 OUT13 OUT14 OUT15 OUT16 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 G: ground, C: cold, H: hot Specifications Ratings 88Formats and channels 16 channels at 44.1/48/88.2/96kHz, 16-bit/24-bit Analog audio output ratings 88ANALOG 1-8/9-16 OUT connectors Connector: D-Sub 25-pin Locking screws: No. 4-40 UNC (inch type) Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu) Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (Switched according to nominal level of device installed in) Output impedance: 200 Ω or lower Output attenuation: 0 to −14 dB (in 0.5dB steps) • Applicable load impedance:2 kΩ or higher • 0dBu=0.775Vrms Audio performance 88Frequency response +0.1 dB/−0.5 dB: 20 Hz/20 kHz (−16 dBFS input, 44.1/48kHz sampling frequency, JEITA) +0.1 dB/-1.0 dB: 20 Hz/40 kHz (−16 dBFS input, 88.2/96kHz sampling frequency, JEITA) 88Distortion (THD+N) 0.001% or less (0 dBFS input, 1kHz, 44.1/48/88.2/96kHz sampling frequency, JEITA) 7 TASCAM IF-AN16/OUT
![](/manual_guide/products/tascam-da6400-ifan16out-owners-manual-2bddb1e/7.png)