TASCAM DA-6400 IF-AN16/OUT Specifications - Page 1
TASCAM DA-6400 Manual
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Product Spec Sheet ANALOG OUTPUTS INTERFACE CARD IF-AN16/OUT IF-AN16/OUT Nov, 2016 ■ Specifications Ratings ・Formats and channels 16 channels at 44.1/48/88.2/96kHz, 16-bit/24-bit Analog audio output ratings ・ANALOG 1-8 / 9-16 OUT connectors Connector: D-Sub 25-pin Locking screws: No. 4-40 UNC (inch type) Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu) Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (Switched according to nominal level of device installed in) Output impedance: 200 Ω or lower Output attenuation: 0 to −14 dB (in 0.5dB steps) •Applicable load impedance:2 kΩ or higher •0dBu = 0.775Vrms Audio performance ・Frequency response +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48kHz sampling frequency, JEITA) +0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96kHz sampling frequency, JEITA) ・Distortion (THD+N) 0.001% or less (0 dBFS input, 1kHz, 44.1/48/88.2/96kHz sampling frequency, JEITA) ・S/N ratio 110 dB or higher (44.1/48/88.2/96kHz sampling frequency, JEITA) 0040a -1- TEAC CORPORATION
![](/manual_guide/products/tascam-da6400-ifan16out-specifications-80f5f63/1.png)