TASCAM DM-24 Installation and Use EPROM Replacement Instructions - Page 4
Detach, Attach
 |
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
TASCAM TEAC Professional Division 7733 Telegraph Road Montebello, CA 90640 Phone (323) 726-0303 Fax (323) 727-7632 INSTALLATION INFORMATION 5. Looking into the unit from the rear right side, you will see the (3) I.C.'s to be replaced. (See Ex. 4) PANEL U31 MAIN U7 MAIN U6 The EPROM can be removed by sliding the black plastic locking device in the direction shown below. The holder then lifts from the PCB allowing removal of the EPROM. Reverse the procedure to install the new EPROM. Detach Attach Ex. 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
. . . . . . . . . . . . . . . . . . . . . . . . . .
TASCAM
TEAC Professional Division
7733 Telegraph Road
Montebello, CA
90640
Phone (323) 726-0303
Fax (323) 727-7632
INSTALLATION INFORMATION
. . . . . . . . . . . . . . . . . . . . . . . . . .
5.
Looking into the unit from the rear right side, you will see the (3) I.C.’s to be replaced.
(See Ex. 4)
The EPROM can be removed by sliding the black plastic locking device
in the direction shown below. The holder then lifts from the PCB allowin
removal of the EPROM.
Reverse the procedure to install
the new
EPROM.
PANEL
U31
Ex. 4
MAIN
U6
MAIN
U7
Detach
Attach