TASCAM DM-24 Application-Specific Documents DM-24 with Digi 001 - Page 3
SETTINGS, will be sent to Pro Tools for recording.
![]() |
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
SETTINGS In the example below, theDM-24 has mic/line inputs 1-8 assigned to channels 1-8. These channels are set to DIRECT OUT. Notice that RETURN C: ADAT trk 1-8 is also chosen for this group of 8 channels. This setting is needed to "send" the DIRECT OUTS to the ADAT digital output. These are the signals that will be sent to Pro Tools for recording. The output page must also be setup to send DIRECT 1-8 to the ADAT output.
![](/manual_guide/products/tascam-dm24-applicationspecific-documents-dm24-digi-001-fb5336c/3.png)
SETTINGS
In the example below, theDM-24 has mic/line inputs 1-8 assigned to channels 1-8.
These channels are
set to DIRECT OUT.
Notice that RETURN C: ADAT trk 1-8 is also chosen for this group of 8 channels.
This setting is needed to “send” the DIRECT OUTS to the ADAT digital output.
These are the signals that
will be sent to Pro Tools for recording.
The output page must also be setup to send DIRECT 1-8 to the ADAT output.