TASCAM DM-24 Application-Specific Documents DM-24 with Digital Performer - Page 5

The small print, the MTC going to the DM-24 is not needed.

Get TASCAM DM-24 PDF manuals and user guides View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

SEND A-E refer to aux sends. If you point to A and press ENTER the encoders on the LCD will show you all of the levels for the first aux send on the channels viewed. Using the cursors you can highlight the encoder area and adjust them 4 at a time. Pressing SHIFT flips the aux send controls from the POD knobs to the faders. This allows you to control the aux sends 8 at a time with touch sensitive faders. When PAN is solid it will show you the pan settings for all channels viewed on the encoders on the LCD screen. Press ENTER and PAN will flash. This simply removes PAN control from the POD knobs. Moves made with the HUI emulation are recorded in Pro Tools automation, NOT with the DM-24 automation. MTC sent from Pro Tools is used to trigger the DM24's internal automation. This is helpful is you are running audio in to the DM-24. If you are ONLY using the DM-24 as a "control surface" and mixing in Pro Tools, the MTC going to the DM-24 is not needed. The small print HUI is a registered trademark of Mackie Designs Inc. Digital Performer is a registered trademark of Mark of the Unicorn and its subsidiaries and divisions. The DM-24 provides basic HUI functionality. Faders, pans, mutes, track arming, aux sends, transports, banking in groups of 8 and individual channel banking. The DM-24 does NOT provide all the features of a Mackie HUI.

  • 1
  • 2
  • 3
  • 4
  • 5
SEND A-E refer to aux sends.
If you point to A and press ENTER the encoders on the LCD will show you all of
the levels for the first aux send on the channels viewed.
Using the cursors you can highlight the encoder area and adjust them 4 at a
time.
Pressing SHIFT flips the aux send controls from the POD knobs to the faders.
This allows you to control the aux sends 8 at a time with touch sensitive faders.
When PAN is solid it will show you the pan settings for all channels viewed on
the encoders on the LCD screen. Press ENTER and PAN will flash. This simply
removes PAN control from the POD knobs.
Moves made with the HUI emulation are recorded in Pro Tools automation, NOT
with the DM-24 automation.
MTC sent from Pro Tools is used to trigger the DM-
24’s internal automation.
This is helpful is you are running audio in to the DM-24.
If you are ONLY using the DM-24 as a “control surface” and mixing in Pro Tools,
the MTC going to the DM-24 is not needed.
The small print
HUI is a registered trademark of Mackie Designs Inc. Digital Performer is a
registered trademark of Mark of the Unicorn and its subsidiaries and divisions.
The DM-24 provides basic HUI functionality.
Faders, pans, mutes, track arming, aux sends, transports, banking in groups of 8
and individual channel banking.
The DM-24 does NOT provide all the features of a Mackie HUI.