TASCAM DR-70D Reference Manual - Page 8
Top panel, Bottom Panel
View all TASCAM DR-70D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 - Names and Functions of Parts j REMOTE connector (2.5mm TRS jack) Connect a TASCAM RC-3F footswitch or TASCAM RC-10 wired remote control (both sold separately) here to enable remote starting and stopping of playback and other functions. A remote control can be used to start, stop and otherwise operate the unit. (See "9 - Using the REMOTE jack" on page 36.) k IN connector (3.5mm stereo mini jack) Connect to the audio output of a camera. Refer to the camera's operation manual to identify this connector on the camera. (See "Camera connection and attachment" on page 16.) l OUT/LINE OUT jack (3.5mm stereo mini jack) Use a stereo mini jack cable to connect this to the external input jack of a camera or line input jack of other equipment. Use the OUTPUT LEVEL item on the MONITOR SETTING screen to adjust the volume output from this jack. Refer to the camera's operation manual to identify this connector on the camera. (See "Camera connection and attachment" on page 16.) ; PHONES jack (3.5mm stereo mini jack) Connect stereo headphones to this stereo mini jack. Use the PHONES control to adjust the volume. z PHONES volume control Use to adjust the volume output from the PHONES jack. CAUTION Before connecting headphones, lower the PHONES volume to the minimum level. Failure to do so could result in a sudden loud noise that could harm hearing, for example. Top panel v Accessory shoe You can use the accessory shoe by removing the included DSLR attachment bracket Bottom Panel x DSLR camera attachment bracket Use a DSLR mounting screw with this bracket, which is preinstalled on the unit. If you do not want to use this bracket, use a coin or other tool to remove the four attachment screws. c DSLR mounting screw (1/4-inch) Use to attach this unit to the bottom of a camera or a rack that supports camera mounting screws, for example. b Tripod mounting thread (1/4-inch) Use to attach this unit to a tripod. CAUTION • Tighten the unit securely to the tripod or microphone stand to prevent it from falling off. • When using this unit attached to a tripod or microphone stand, place the tripod or stand on a level surface. • Some tripods have different screw specifications that make direct connection impossible. Use a commercially-available adapter with such tripods. n Video camera pin hole When using a tripod with a pin for video cameras, align this hole with the pin when attaching the unit to the tripod. 8 TASCAM DR-70D