TASCAM DV-W11R Owners Manual - Page 32

Appendix B. LCD Messages This appendix explains the messages that may appear on the LCD panel. Normal Conditions Message Meaning Initialize SDRAM Detect drives Initialize system memory. Detect the drives connected to the system. User Abort Cancel a job during operation. Analyzing Source Drive Not Ready Analyze the source disc. Source drive is not ready to read. Target Drive Not Ready Target drive is not ready to write. Erasing disc Source Disc Not Ready The system is erasing the data on the disc. Source disc is not ready to be read. Target Disc Not Ready Fail to get Drive Info! Target disc is not ready to be written into. Drive information cannot be obtained. Fail to get SRC Disc Info! Information about a source disc cannot be obtained. Save new config Fail! Load Default Config? The new configuration settings cannot be saved. Do you want to load the default settings? Src&Tgt can't in the same channel Preparing During comparison, the source and target discs cannot occupy the same channel. The system is preparing to record. Check Target Please Wait Audio Disc!!!Can't compare! The system is checking the target device. The system cannot compare the audio disc. Identical Comparison results are identical. Read disc error Cannot read TOC During a comparison, the disc could not be read. The system cannot read the contents of the disc. TOC not match Comparison results are not identical. Source Disc Empty!!! The source disc contains no data. Target overflow The target disc capacity is insufficient to store new data. Target Disc Not Empty!!! The target disc still contains data. Press a Key to Eject Good Disc Press any key to eject a disc after copying. (Copy suc- cessful.) Press a key to Eject Fail Disc Press any key to eject a disc after copying. (Copy failed.) DVD-RW does not Support the DVD-RW does not support this function. Func Hold ESC to exit All data will be lost, erase? Press ESC for one second to terminate the test. All data on the disc will be lost. Confirm erasure request. Erase Finished No Erasing to Disc in DVDRW!! The erasing of the data is complete. The disc in the DVD-RW drive is not rewritable. 24 Rackmount DVD/CD Duplicator User's Manual