TASCAM MD-CD1MKIII mkIII Owners Manual - Page 13
– Connections, Audio equipment, Power source
View all TASCAM MD-CD1MKIII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 - Connections Before connecting the MD-CD1MKIII to other units, please read their operation manuals thoroughly to ensure proper connection. Connect the power cord only after all connections have been made. Audio equipment ª Connecting analog audio equipment Connect analog stereo amplifiers, mixers and recorders to the analog line inputs and outputs. There are input terminals for the MD deck recording source and terminals for both the CD and MD outputs, as well as a COMMON output for the output signals of the CD deck, the MD deck, or both. Selection of either deck's output signals can be performed on the SYSTEM sub-menu of the CD menu under the "COMMON?" option. NOTE • You can use this unit in a system configured with balanced analog input/output only by attaching a separately sold balanced analog input/output board (TASCAM LA-MC1). • Connection cables are not supplied with this unit. • Do not bundle the line level sound signal cables with the power or speaker cords as noise or diminished sound quality could result. ª Connecting digital audio equipment Digital stereo amplifiers, mixers and recorders can be connected through the digital input/output terminals (optical or coaxial). NOTE The MD-CD1MKIII features a sampling rate converter, which enables you to digitally record signals not only at a sampling rate of 44.1 kHz (a sampling rate for MD), but also at sampling rates of 32 kHz or 48 kHz. Power source This unit has been designed to operate on the specified power voltage only. Do not plug the power cord into outlets of any other voltage. TASCAM MD-CD1MKIII 13