TASCAM TRACKPACK iXR Owners Manual - Page 7

Rear panel w Kensington Security Slot e PC/MAC/POWER port (USB B-type) When using this unit with an iOS device, use the included USB cable to connect the USB power adapter included with the iOS device. Doing this allows this port to function as a power supply connector. When using this unit with a computer, use the included USB cable to connect it to the computer. r port (USB-A type) To connect this unit with an iOS device, use the Lightning-USB cable included with the iOS device. NOTE This port will not provide power to the iOS device, nor will it draw power from the device. Installing the dedicated software To use this unit with a computer, dedicated software must be installed on the computer. With some exceptions, the latest software for the operating system you are using can be downloaded from the TEAC Global Site (http://teac-global.com/). • To use this unit with an iOS device, install the TASCAM Settings Panel for Audio Interface app. The standard iOS driver will be used. The Settings Panel app can be downloaded for free from the App Store. • To use this unit with a Windows computer, install the driver. When you install the driver, the Settings Panel application will be installed at the same time. • To use this unit with a Mac, install the Settings Panel application. The standard OS driver will be used. CAUTION Before starting to install software, quit other applications. Installing the iOS Settings Panel Find the TASCAM Settings Panel for Audio Interface app on the App Store and download it. Downloading it will install it automatically. t PHANTOM switch Use this switch to provide +48V phantom power to the IN 1/IN 2 jacks. y MIDI OUT connector This 5-pin DIN is a standard MIDI output jack. It outputs MIDI signals. u MIDI IN connector This 5-pin DIN is a standard MIDI input jack. Use it to input MIDI signals. i LINE OUT 1/L and 2/R jacks These standard TRS jacks are analog line outputs. Use the Settings Panel to set the signals output from the LINE OUT 1/L and 2/R jacks. (Tip: HOT, Ring: COLD, Sleeve: GND) Installing the Windows driver CAUTION • Complete installation of the driver on the computer before connecting the unit to it with the USB cable. • If you already connected the unit to the computer using the USB cable before installing the driver and the Found New Hardware Wizard launched, close the message and disconnect the USB cable. 88 Windows driver installation procedures 1. Download the latest Windows driver for the operating system you are using from the TEAC Global Site (http://teac-global.com/) and save it on the computer to be used with the unit. 2. Open the saved Windows driver (zip file) on, for example, the computer desktop. 3. Double-click the "iXR_Installer_XXX.exe" (XXX is the version number), file in the folder that appears after uncompression to automatically launch the installation software. 4. When a "Security Warning" or "User Account Control" screens appear, click the "Yes" button. 7 TASCAM iXR