TASCAM US-16x08 Reference Manual - Page 14

Mixer

Get TASCAM US-16x08 PDF manuals and user guides View all TASCAM US-16x08 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

6 - Using the Settings Panel MIXER page 1 2 8649573 0 wq Windows Settings Panel screen NOTE On a Mac, "View" and "SceneMemory" appear in the menu bar at the top of the screen. For details, see "Settings Panel pull-down menus" on page 19. the less acute it becomes, making it affect a broader frequency band. Range: 0.25 - 16.00 (default: 1.00) LOW MID GAIN knob 1 EQUALIZER (4-band parametric EQ) Use the equalizer to increase or decrease the levels of specific frequency ranges. This can be used, for example, to enhance the sound of individual instruments, to adjust the balance of a wide frequency range and to cut specific unwanted frequencies. The frequency response with the current settings is shown as a graph even when the equalizer is off. The equalizer has a high-shelf HIGH band, a low-shelf LOW band and peaking (bell-shaped) HIGH MID and LOW MID bands. HIGH GAIN knob Sets the amount the level is increased or decreased for the HIGH band. Range: ±12 dB (default: 0 dB) HIGH FREQ knob Sets the cutoff frequency of the HIGH band. Range: 1.7 kHz - 18.0 kHz (default: 5.0 kHz) HIGH MID GAIN knob Sets the amount the level is increased or decreased for the HIGH MID band. Range: ±12 dB (default: 0 dB) HIGH MID FREQ knob Sets the center frequency of the HIGH MID band. Range: 32 Hz - 18.0 kHz (default: 1.2 kHz) HIGH MID Q knob Sets the acuteness of the peak of the HIGH MID band. The higher the value the more acute it becomes, making it affect a narrower frequency band. The lower the value, Sets the amount the level is increased or decreased for the LOW MID band. Range: ±12 dB (default: 0 dB) LOW MID FREQ knob Sets the center frequency of the LOW MID band. Range: 32 Hz - 18.0 kHz (default: 300 Hz) LOW MID Q knob Sets the acuteness of the peak of the LOW MID band. The higher the value the more acute it becomes, making it affect a narrower frequency band. The lower the value, the less acute it becomes, making it affect a broader frequency band. Range: 0.25 - 16.00 (default: 1.00) LOW GAIN knob Sets the amount the level is increased or decreased for the LOW band. Range: ±12 dB (default: 0 dB) LOW FREQ knob Sets the cutoff frequency of the LOW band. Range: 32 Hz - 1.6 kHz (default: 80 Hz) LCF button Turn the LCF button on to enable the low-cut filter, which cuts noise and other sounds at low frequencies. Off (default): LCF button unlit On: LCF button lit To set the equalizer for a channel, select its Analog X button (3). The equalizer settings will be shown for the channel selected by its Analog X button (3). 14 TASCAM US-16x08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
14
TASCAM
US-16x08
6 – Using the Settings Panel
MIXER page
1
4
9
6
8
0
q
w
2
3
5
7
Windows Settings Panel screen
NOTE
On a Mac, “View” and “SceneMemory” appear in the menu
bar at the top of the screen. For details, see “Settings Panel
pull-down menus” on page 19.
1
EQUALIZER (4-band parametric EQ)
Use the equalizer to increase or decrease the levels of
specific frequency ranges. This can be used, for example,
to enhance the sound of individual instruments, to adjust
the balance of a wide frequency range and to cut specific
unwanted frequencies.
The frequency response with the current settings is shown
as a graph even when the equalizer is off.
The equalizer has a high-shelf HIGH band, a low-shelf LOW
band and peaking (bell-shaped) HIGH MID and LOW MID
bands.
HIGH GAIN knob
Sets the amount the level is increased or decreased for
the HIGH band.
Range: ±12 dB (default: 0 dB)
HIGH FREQ knob
Sets the cutoff frequency of the HIGH band.
Range: 1.7 kHz – 18.0 kHz (default: 5.0 kHz)
HIGH MID GAIN knob
Sets the amount the level is increased or decreased for
the HIGH MID band.
Range: ±12 dB (default: 0 dB)
HIGH MID FREQ knob
Sets the center frequency of the HIGH MID band.
Range: 32 Hz – 18.0 kHz (default: 1.2 kHz)
HIGH MID Q knob
Sets the acuteness of the peak of the HIGH MID band.
The higher the value the more acute it becomes, making
it affect a narrower frequency band. The lower the value,
the less acute it becomes, making it affect a broader
frequency band.
Range: 0.25 – 16.00 (default: 1.00)
LOW MID GAIN knob
Sets the amount the level is increased or decreased for
the LOW MID band.
Range: ±12 dB (default: 0 dB)
LOW MID FREQ knob
Sets the center frequency of the LOW MID band.
Range: 32 Hz – 18.0 kHz (default: 300 Hz)
LOW MID Q knob
Sets the acuteness of the peak of the LOW MID band.
The higher the value the more acute it becomes, making
it affect a narrower frequency band. The lower the value,
the less acute it becomes, making it affect a broader
frequency band.
Range: 0.25 – 16.00 (default: 1.00)
LOW GAIN knob
Sets the amount the level is increased or decreased for
the LOW band.
Range: ±12 dB (default: 0 dB)
LOW FREQ knob
Sets the cutoff frequency of the LOW band.
Range: 32 Hz – 1.6 kHz (default: 80 Hz)
LCF button
Turn the LCF button on to enable the low-cut filter, which
cuts noise and other sounds at low frequencies.
Off (default): LCF button unlit
On: LCF button lit
To set the equalizer for a channel, select its Analog X button
(
3
).
The equalizer settings will be shown for the channel selected
by its Analog X button (
3
).