TASCAM US-2400 Quick Start Guide - Page 4

MIDI Ports

Get TASCAM US-2400 PDF manuals and user guides View all TASCAM US-2400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

The final step (3) is to set up the controls. Select Tools/Mackie Control from within Sonar. The Mackie Control window appears. Click the Configure Layout button (bottom right of window). Now press and hold the F-KEY and SHIFT keys and press the master SEL key. Press the on-screen lower right button (now called Press Again When Done) and close the window. Digital Performer: Setting up the DAW After using the master SEL and AUX 3 keys to initialize the US-2400, use the Audio MIDI Setup program (/Applications/Utilities) (1) to create one Mackie Control and two Mackie Control Extender units. Connect them (both the INs and OUTs) on screen to MIDIs 1, 2 and 3 of the US-2400. Then (2) open the Mackie Control Setup panel (Setup/Control Surfaces menu) and configure one Mackie Control and two Mackie Control Extenders. Assign them to the US-2400 ports that appear. 1 2 Logic: Setting up the DAW When the master SEL and AUX 4 keys have been used to set up the Mackie Control emulation for Logic, start Logic. It will automatically detect and configure itself to use the US-2400. MIDI Ports The US-2400 provides four MIDI ports through which data is transmitted and received. MIDI Port 1 corresponds to the master controls, and faders 1-8, MIDI Port 2 to faders 9-16, and MIDI Port 3 to faders 17-24. The joystick (and encoders in MIDI controller mode) are assigned to Port 4. TEAC CORPORATION Printed in China Phone: +81-422-52-5082 www.tascam.com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan

  • 1
  • 2
  • 3
  • 4
°e final step (
3
) is to set up the controls. Select
Tools/Mackie Control
from within
Sonar. °e
Mackie Control
window appears. Click the
Configure Layout
button (bot-
tom right of window). Now press and hold the
F-KEY
and
SHIFT
keys and
press the master
SEL
key. Press the on-screen lower right button (now called
Press Again When Done
) and close the window.
Digital Performer: Setting up the DAW
After using the master
SEL
and
AUX 3
keys to initialize the US-2400, use the
Audio MIDI Setup
program (
/Applications/Utilities
) (
1
) to create one Mackie Control and
two Mackie Control Extender units. Connect them (both the INs and OUTs)
on screen to MIDIs 1, 2 and 3 of the US-2400.
°en (
2
) open the
Mackie Control Setup
panel (
Setup/Control Surfaces
menu) and configure
one Mackie Control and two Mackie Control Extenders. Assign them to the
US-2400 ports that appear.
Logic: Setting up the DAW
When the master
SEL
and
AUX 4
keys have been used to set up the Mackie
Control emulation for Logic, start Logic. It will automatically detect and con-
figure itself to use the US-2400.
MIDI Ports
°e US-2400 provides four MIDI ports through which data is transmitted
and received. MIDI Port 1 corresponds to the master controls, and faders 1–8,
MIDI Port 2 to faders 9–16, and MIDI Port 3 to faders 17–24. °e joystick
(and encoders in MIDI controller mode) are assigned to Port 4.
1
2
TEAC CORPORATION
Phone: +81-422-52-5082
www.tascam.com
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan