TASCAM iU2 Owners Manual - Page 22

level output from the analog LINE OUT L, LINE OUT R

Get TASCAM iU2 PDF manuals and user guides View all TASCAM iU2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

4 - Application Guide For the Format in the Audio Input section, set the sampling frequency and number of channels so that they match that used in your audio application. • When using Mac OS X 10.5.8 Overload indicators 4 To adjust the output level, use the knobs on the top panel. Use the MON MIX knob to adjust the monitoring balance between the input and computer sounds, and use the LINE OUT and PHONES knobs to adjust the level output from the analog LINE OUT L, LINE OUT R and headphone output ( ) jacks. Set Default Input, Properties for, Default Output and System Output to iU2. For the Format in the Audio Input section, set the sampling frequency and number of channels so that they match that used in your audio application. 3 Use the INPUT L and INPUT R knobs on the top panel of the unit to adjust the input level. Adjust the level so that the overload (L and R) indicators do not light. LINE OUT knob PHONES knob 5 Use the MON MIX knob to adjust the volume balance between the computer and input signals. MON MIX knob 22 TASCAM iU2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
22
TASCAM iU2
4 – Application Guide
For the
Format
in the
Audio Input
section, set the
sampling frequency and number of channels so that
they match that used in your audio application.
When using Mac OS X 10.5.8
•
Set
Default Input
,
Properties for
,
Default Output
and
System
Output
to
iU2
.
For the
Format
in the
Audio Input
section, set the
sampling frequency and number of channels so that
they match that used in your audio application.
3
Use the INPUT L and INPUT R knobs on the top panel
of the unit to adjust the input level. Adjust the level so
that the overload (L and R) indicators do not light.
Overload indicators
4
To adjust the output level, use the knobs on the top
panel. Use the MON MIX knob to adjust the monitoring
balance between the input and computer sounds, and
use the LINE OUT and PHONES knobs to adjust the
level output from the analog LINE OUT L, LINE OUT R
and headphone output (
) jacks.
LINE OUT
knob
PHONES
knob
5
Use the MON MIX knob to adjust the volume balance
between the computer and input signals.
MON MIX
knob