TEAC AP-701 Owners Manual English Francais Espanol - Page 10

Connections (continued) Using BI-AMP output mode This unit can be used as a mono bi-amplifier. Set the OUTPUT MODE switches on the units for the L and R channels to BI-AMP. In BI-AMP mode, use two of these units for stereo playback. What is bi-amp connection? This method operates amplifiers independently for low-frequency and high-frequency speaker units. NOTE oo Sound input through the analog audio INPUTS L connectors will be output from both the L and R SPEAKER terminals. VVATTENTION oo Bi-amplification is not possible with speakers that do not have both low frequency (LF) and high frequency (HF) connectors. oo When using bi-amp connections, remove speaker terminal links and disconnect the connections between speaker ¥ connectors and between ^ connectors. oo Do not connect anything to the unit's analog audio INPUTS R connectors. Doing so could result in damage. Connection example AP-701 for R channel Speaker R HF LF AP-701 for L channel Speaker L HF LF Included power cord XLR cable RCA cable Included power cord XLR cable RCA cable Set the OUTPUT MODE switch to BI-AMP. Connect using a set of only one type. c Wall outlet Set the OUTPUT MODE switch to BI-AMP. Connect using a set of only one type. c Wall outlet XLR pin assignment 1. COMMON 2. HOT (+) 3. COLD (−) R L Audio output (PRE OUT, etc.) Preamplifier or other device with a preamplifier function (such as a DAC) 10 oo Set the INPUT selection and OUTPUT MODE switches for the R channel the same as for the L channel.