TEAC DM-4800 DM-4800 Effects List - Page 3
Effects Parameter List, TASCAM FX2.0 Effects Parameters, MONO CHORUS FX2.0 - discontinued
View all TEAC DM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Effect Parameter List Effect parameter list TASCAM FX2.0 Effect Parameters MONO CHORUS FX2.0 This chorus effect features mono-in (one input) and stereo-out (two outputs). Table 1.1: Mono Chorus parameters Parameter LFO rate Indicator LFO Rate Range Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps) Description Specifies LFO frequency. Remarks LFO depth LFO Depth 0.0% - 100.0% (0.1% steps) Specifies LFO modulation depth. Pre-delay Pre-Delay 0 ms - 500 ms (0 ms - 9.99 ms: 0.01 ms steps; 10 ms - 99 ms: 1 ms steps; 100 ms - 500 ms: 10 ms steps) Specifies time between onset of original sound and onset of the effect sound. Using this parameter enables you to make interesting and detailed settings based on subtle changes due to phase cancellation. Feedback amount Feedback Amt 0% - 90% (1% steps) Specifies amount of delay line output signal returned to delay line input. Feedback inversion InvertFbk Off, On Determines whether or not feedback path output signal will be inverted. LFO waveform LFO Type type Off, Sine, Triangle, Sawtooth Up, Sawtooth Specifies LFO waveform Down, Square type. LFO softening LFO Smooth 0.0% - 100.0% (0.1% steps) Specifies low-pass filter coefficient applied to LFO waveform. This parameter improves unnatural sound at discontinuous points by smoothening out edges of sawtooth or square waveform. Dry delay DryDly (Thru 0) 0.0% - 100.0% (0.1% steps) Specifies delay of dry signal that simulates " through zero" flanging. Low shelving LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency Specifies low shelving This filter is applied to filter corner frequency. feedback loops. Low shelving filter gain LoShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving This filter is applied to filter gain. feedback loops. High shelving HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) filter frequency Specifies high shelving This filter is applied to filter corner frequency. feedback loops. High shelving HiShelfGain -20.0 dB - 0.0 dB (0.1 dB steps) filter gain Specifies high shelving This filter is applied to filter gain. feedback loops. TASCAM DM-4800 Effect list