TEAC GF-550 GF-550 Manual - Page 10
Connection, FM antenna, AM loop antenna, AUX IN/OUT jacks, AC Power Cord - how to use
View all TEAC GF-550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connection A B C D White Red White White Red White LR RL LINE OUT LINE IN Cassette Tape Deck, etc. CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord. B AM loop antenna To stand the loop antenna on a surface, fix the claw to the slot in the antenna base. A FM antenna While in FM mode, tune in an FM station and extend the lead to find the best position for the reception. This antenna may need to be repositioned if you move your unit to a new location. Connect the loop antenna's wires to the AM antenna terminals. FM Outdoor Antenna In an area where FM signals are weak, it will be necessary to use an outdoor FM antenna. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements. < Disconnect the FM indoor antenna when using an outdoor antenna. < Make sure to connect the black wire to the GND terminal. Place the antenna on a shelf or hang it on a window frame, etc., in the direction which gives the best reception. Keep all other wires such as power cords, speaker wires or interconnect wires as far away as possible from the antenna. 75 Ω connector While recording from FM broadcast, noise may increase. To reduce unwanted noise, outdoor antenna will be required or record it with the FM mode switched to MONO. 10 C AUX IN/OUT jacks Analog 2-channel audio signal is input or output from these jacks. Connect these jacks to a CD player, cassette tape deck, etc. using attached RCA cables. Make sure to connect: white plug q white jack (L: left channel) red plug q red jack (R: right channel) D AC Power Cord Plug this AC power cord into an AC wall socket.