TEAC HD-P2 HD-P2 Software Updates v. 1.04 Readme - Page 2

HD-P2 ReadMe Maintenance Items • Timecode cannot be turned on while in File Edit screen. This is because the File Edit screen requires control by the transport keys in conflict with those keys use while in timecode chase mode. The file edit screen can no longer be entered while chasing timecode. • Previously, when chasing timecode and the timecode was stopped and started quickly, the HD-P2 would sometimes not re-enter chase (even with Auto Trigger mode enabled). This has been fixed. • Rare instances of no audio playback at 192k while chasing timecode using certain CF cards have been fixed. • Previously, a buffer overrun could occur with Pre-Record enabled and beginning to record at 00:00:00:00. This has been fixed. • Previously, buffered audio was not being written to disk when stop was pressed. This has been fixed. • Previously, chasing timecode at 23.976 or 24.975 would not work under certain conditions. This has been fixed. • Previously, the correct clock source was not shown in the Audio Clock Information screen when timecode was enabled. This has been fixed. Miscellaneous • Some USB keyboards will not work with the HD-P2 when using a USB to PS/2 adapter. Using a PS/2 keyboard is strongly recommended for correct operation. • Note that the Media Speed Check utility is optimized for use with solid state Flash media. • Input monitor is now correctly turned on when waiting to record locked to timecode. • Previously, too many markers could be created under certain conditions when recording and chasing timecode. This has been fixed. • The Max File Size parameter is now included in the system defaults. • A New Project or Load Project command now correctly turns off the timecode LED. • Previously, locating during playback did not function consistently as expected if a Locate button was pressed multiple times quickly. This has been fixed. • Previously, renaming a project could cause audio output to mute until the project was reloaded. This has been fixed. • Previously, discontinuous timecode, or the HD-P2 attempting to lock to timecode before the code was stable, could result in extra takes being written. This has been fixed. • Previously, viewing the More Information screen from the File Edit screen would disable timecode chase. This has been fixed. • The ":" frame separator is now displayed correctly in the menus, including the ":" separator for drop frame operation. TEAC CORPORATION Phone: +81-422-52-5082 D00919820A 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Printed in China