TEAC TN-280BT Owners Manual English Francais Espanol Deutsch Italiano Nederlan - Page 11

Troubleshooting If you experience a problem with this unit, please check the following items before requesting service. Something other than this unit could also be the cause of the problem. Please also check that the connected devices are also being used properly. If it still does not operate correctly, contact the retailer where you purchased the unit. No power. ee Confirm that the AC adapter is plugged into an outlet. Then, press the STANDBY/ON button to turn the unit on (page 5). There is no sound. ee When connecting this unit's analog audio output connectors to the audio input connectors of an amplifier or other equipment, set the PHONO EQ (audio output setting) switch to ON (page 5). Playback is not possible; there is noise. ee Confirm that the stylus cover (made of white plastic) has been removed. ee Fingerprints and dust on a record can cause noise and the sound to skip. Use a commercially-available record cleaner to clean records (page 7). ee Clean the stylus (page 9). ee If the stylus is worn-out, replace it (page 9). ee Place the unit as far away as possible from TVs, microwave ovens and other devices that emit electromagnetic waves. The pitch is wrong. ee Select the rotation speed indicated on the record (page 8). The sound is skipping. ee Vibrations will cause skipping. Place this unit in a stable location. ee If the record is dirty, wipe it clean. ee Do not use scratched records. Connection is not possible with the Bluetooth speaker I want to connect. ee Turn both this unit and the Bluetooth device off once. Turn them both on and try pairing again. ee Turn off the power of other Bluetooth speakers within 10 meters (33 ft). The closest Bluetooth speaker will be paired. Connection with the Bluetooth speaker succeeded, but I cannot hear any playback sound or the sound breaks up during playback. ee Check the volume of the Bluetooth speaker. ee Press the PAIRING button on this unit for at least six seconds to disconnect the Bluetooth speaker once. Then, try pairing again. ee Turn this unit off and then on again. Then, press the PAIRING button to try pairing again. Connection with the smartphone is not possible. ee This unit functions as a Bluetooth transmitter, and it can send sound to Bluetooth speakers. Since it does not function as a Bluetooth receiver, it cannot be connected to a smartphone. Specifications Turntable (platter) Drive system Belt drive Motor DC motor Rotation speed 33 1/3 rpm, 45 rpm Rotation speed variation 2% Wow and flutter 0.2% SN ratio 67 dB or higher (A-weighted, 20 kHz LPF) Turntable (platter Aluminum die-cast 30cm (12") diameter Tonearm Tonearm type Static-balanced straight-pipe tonearm Effective tonearm length 223 mm Tracking force variation range 0-5 g Acceptable cartridge weight 3.5-6.5 g Cartridge (for TN-280BT-A3) Type VM (equivalent to MM) Output voltage 2.5 mV (1 kHz, 3.54 cm/s) Tracking force 3.5 ±0.5 g Cartridge weight 5 ±0.3 g Included headshell weight 10 g (including screws, nuts and wires) oo An Audio-Technica AT3600L VM Type cartridge is installed in this unit. Note: VM type cartridges have the same characteristics as MM type cartridges. oo Replacement stylus model: ATN3600L Cartridge (for TN-280BT-A) Type VM (equivalent to MM) Output voltage 3.5 mV (1 kHz, 5 cm/s) Tracking force 2.0 ±0.5 g Cartridge weight 5.7 ±0.5 g Included headshell weight 10 g (including screws, nuts and wires) oo An Audio-Technica AT95E VM Type cartridge is installed in this unit. Note: VM type cartridges have the same characteristics as MM type cartridges. oo Replacement stylus model: ATN95E Output voltage PHONO EQ ON 149 mV (−16.5 dBV) Output connectors RCA Bluetooth function Bluetooth version 4.0 (DUAL MODE) Output class Class 2 Supported profile A2DP Codec SBC General AC adapter power Input AC 100 V - AC 240 V, 50-60 Hz Output DC 12 V, 500 mA Power consumption Standby 0.2 W or less On (START 2.0 W or less Weight 4.9 kg (10 7/8 lb) Operating temperature range 5°C to 35°C Dimensions (W × H × D) (including protrusions) When the dust cover is closed 420 × 117 × 356 mm (16 5/8" × 4 5/8" × 14 1/8") When the dust cover is open 420 × 381 × 402 mm (16 5/8" × 15" × 15 7/8") When the dust cover is removed 420 × 102 × 356 mm (16 5/8" × 4 1/8" × 14 1/8") oo Performance data is specified at 20°C. Included accessories Felt mat × 1 45 RPM adapter × 1 Counterweight × 1 Headshell × 1 oo TN-280BT-A3: Audio-Technica VM type (dual magnet) stereo cartridge (AT3600L) preinstalled oo TN-280BT-A: Audio-Technica VM type (dual magnet) stereo cartridge (AT95E) preinstalled Turntable × 1 Dust cover × 1 Hinges × 2 Audio cable × 1 AC adapter (GPE053A-V120050) × 1 Owner's manual (this document) × 1 oo For information about the warranty, users living in the USA and Canada should see page 82 and the back cover (warranty document). Users living in Europe and other regions should see page 83. oo Specifications and appearance are subject to change without notice. oo Weight and dimensions are approximate. oo Illustrations in this owner's manual might differ slightly from production models. 11 ENGLISH