TP-Link AC2300 Archer C2300EU V1 Quick Installation Guide - Page 1
TP-Link AC2300 Manual
View all TP-Link AC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Installation Guide AC2300 Wireless MU-MIMO Gigabit Router Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable to the router's Internet port, and then follow Step1, 5 and 6 to complete the hardware connection. Internet Power adapter Modem 1 Install the antennas. Power adapter Router 2 Turn off the modem, and remove the backup battery if it has one. 3 Connect the modem to the router's Internet port with an Ethernet cable. 5 Connect the power adapter to the router and turn on the router. 4 Turn on the modem, and then wait about 2 minutes for it to restart. 6 Verify that the following LEDs are on and solid to confirm the hardware is connected correctly. Power On 2.4GHz On 5GHz On Internet On Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the Wi-Fi On/Off button on the side panel for about 2 seconds. Both the LEDs should turn solid on in a few seconds.