TP-Link AC3200 Archer C3200 V1 Quick Install Guide - Page 2

Configuring the Router 1. Connect your computer to the router (wired or wireless). Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable Wireless Connect wirelessly by using the SSIDs (network names) and Wireless Password printed on the product label at the bottom of the router. You can also connect by pressing the WPS button on the front panel of the router. For more information about WPS, refer to the User Guide at www.tp-link.com. 2. Configure the router via a web browser. A Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of a web browser. Use admin for both username and password, and click Login. Note: If the login page does not appear, please refer to FAQ > Q1. http://tplinkwifi.net admin Login B Create a new username and password, then click Confirm. Re-login using the new credentials. New Username: New Password: Confirm New Password: User_123 Low Middle High Confirm C Click Quick Setup, select your region and time zone, and click Next. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. is fixed to the U.S. region. Internet Connection Type Wireless Settings Connection Test Region and Time Zone Summary Region: Time Zone: United States (GMT-08:00) Pacific Time (US & Canada); Tijuana Exit Next D Select your Internet Connection Type, or click Auto Detect if you are unsure of what your connection type is. Click Next and follow the instructions. Internet Connection Type Wireless Settings Connection Test Region and Time Zone Summary Auto Detect Dynamic IP Static IP PPPoE L2TP PPTP Note: If you are not sure which Internet Connection Type you have, use Auto Detect or contact your Internet Service Provider (ISP) for assistance. Back Next E Use the default or change the wireless settings, and click Next. Note: If you change the default SSID and password, please note the new wireless settings. Internet Connection Type Wireless Settings Connection Test Region and Time Zone Summary Please set the SSIDs and passwords for 2.4GHz and 5GHz wireless networks. Wireless Network (2.4GHz): Enable Wireless Network Name(SSID): Password: TP-LINK_7A30 12345670 Wireless Network 5GHz-1): Wireless Network Name(SSID): Password: Enable TP-LINK_7A30_5G_1 12345670 Wireless Network 5GHz-2): Wireless Network Name(SSID): Password: Enable TP-LINK_7A30_5G_2 12345670 Back Next F Confirm your settings, and then click Save. G Test your Internet connection, then click Finish to complete the Quick Setup. Internet Connection Type Wireless Settings Connection Test Region and Time Zone Congratulations! You have completed the Quick Setup process. Click Test Internet Connection below, then click Finish. Test Internet Connection Summary Back Finish Tether App To conveniently manage your network, scan the QR code to download the Tether app on your mobile device. USB Features Use the USB ports for media sharing, storage sharing and printer sharing across your local network. You can also set up an FTP server to access your files remotely through the Internet. USB 2.0 Port Remote Access via FTP Server Media Sharing USB 3.0 Port Local Storage Sharing To learn more about the USB features, visit http://tp-link.com/app/usb, or simply scan the QR code. Printer Sharing FAQ (Frequently Asked Questions) Q1. What can I do if the login page does not appear? A1. If the computer is set to a static or fixed IP address, change the setting to obtain an IP address automatically. A2. Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser and press Enter. A3. Use another web browser and try again. A4. Reboot your router and try again. A5. Disable then re-enable the network adapter being used. Q2. What can I do if I cannot access the Internet? A1. Check if the Internet is working properly by connecting a computer directly to the modem using an Ethernet cable. If it is not, contact your Internet Service Provider. A2. Log in to the Web Management page of the router, and go to the Basic > Network Map page to check whether the Internet IP address is valid or not. If it is, please run the Quick Setup again; otherwise, recheck the hardware connection. A3. For cable modem users, log in to the Web Management page of the router. Go to Advanced > Network > Internet > MAC Clone, click Use Current Computer MAC Address and click Save, then reboot both the modem and the router. A4. Reboot your router and try again. Q3. How do I restore the router to its factory default settings? A1. While the router is powered on, press and hold the Reset button on the back for about 7 seconds until all LEDs go off, then release the button. A2. Log in to the Web Management page of the router. Go to Advanced > System tools > Backup & Restore, and click Factory Restore. The router will restore and reboot automatically. Q4. What can I do if I forgot my web management password? A. Refer to FAQ > Q3 to reset the router, and then use the default admin (all lowercase) for both username and password to log in. Q5. What can I do if I forgot my wireless network password? A1. The factory default Wireless Password/PIN is printed on the product label of the router. A2. Log in to the router's Web Management page, and go to Basic > Wireless to obtain or reset your wireless password. ©2015 TP-LINK