TP-Link AP200 AP200EU V1 Quick Install Guide - Page 1
TP-Link AP200 Manual
View all TP-Link AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Installation Guide 11AC Wireless Gigabit Access Point AP200 Before your start Which mode do you need? Please refer to the table to choose a proper mode. Scenarios Operating Modes You want to convert your wired (Ethernet) network to a wireless network. AP Mode (Default Mode) You are in a Wi-Fi dead-zone or a place with weak wireless signal. You want to have a greater effective range of the wireless signal throughout your home or office. Repeater/Bridge Mode You have a wired device with an Ethernet port and no wireless capability, for example, a Smart TV, Media Player, or game console. You want to connect it to the Internet wirelessly. Client Mode You want your devices connected to different wireless networks and isolated by VLANs. Multi-SSID Mode 7106505931 REV1.0.0 Configure the AP Device AP Mode (Default)The AP device transforms your wired network into wireless. Internet AP200's SSID Wired Router B A C D 1. Connect the AP device according to steps A to D in the diagram. 2. Turn on the power and wait until the Power ( ) and Wireless ( & ) LEDs are lit and stable, use the default SSID and Password printed on the product label to join the AP device's Wi-Fi network. Repeater/Bridge Mode The AP device extends the range of an existing Wi-Fi network. Internet Host AP's SSID AP200's SSID Host AP A B 1. Connect the AP device according to steps A and B in the diagram. 2. Turn on the power and wait until the Power ( ) and Wireless ( & ) LEDs are lit and stable, use the default SSID and Password printed on the product label to join the AP device's Wi-Fi network. Note: You can enjoy the Internet surfing now. For your wireless network security, it is recommended to change the default SSID (network name) and the password of your Wi-Fi network. To do so, perform the following steps. 3. Launch a web browser and enter http://tplinkap.net, then log in using admin (all lowercase) for both Username and Password. 4. Click Quick Setup, then select Access Point mode and click Next. Follow the step-by-step on-screen instructions to complete the configuration. Now, reconnect your wireless devices to the new Wi-Fi network. Enjoy! 3. Launch a web browser and enter http://tplinkap.net, then log in using admin (all lowercase) for both Username and Password. 4. Click Quick Setup, then select Repeater/Bridge mode and click Next. Follow the step-by-step on-screen instructions to complete the configuration. 5. Relocate the AP device to a good place. For details, you can refer to Q5 in Frequently Asked Questions (FAQ). Now, connect your wireless devices to the Wi-Fi network using the AP device's SSID and password. Enjoy! Client Mode The AP device functions as a wireless adapter to connect the wired device (e.g. Xbox/TV) to a wireless network. Internet Host AP's SSID Host AP 3. Connect your computer or smart device to the AP device via a wired or wireless connection. The default SSID and wireless password are printed on Other Device the product label. or 4. Launch a web browser and enter http://tplinkap.net, then log in using admin TV (all lowercase) for both Username and Password or A B 5. Click Quick Setup, then select Client mode and click Next. Follow the step-by-step on-screen instructions to complete the configuration. 1. Connect the device according to the steps A and B in the diagram. 2. Turn on the power and wait until the Power ( ) LED is lit and stable. Now, connect your wired-only device to the AP device using an Ethernet cable. Enjoy!