TP-Link AV500 TL-PA4010 V1.0 User Guide - Page 28
TL-PA4010, Join an existing Powerline AV Network, Step 1, Leave
View all TP-Link AV500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TL-PA4010 AV500 Nano Powerline Adapter Join an existing Powerline AV Network: Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network. Step 1. Press and hold the Pair button on Powerline adapter C for 1 second. Step 2. Press and hold the Pair button on Powerline adapter A/B for 1 second. (This step must be taken within 120 seconds after step 1 is finished.) Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power LED on Powerline adapter A/B and C will stop flashing and become solid light when the connection is made. Note: The sequence of Step 1 and Step 2 can be exchanged. Leave an existing Powerline AV Network: As the figure above shown, Powerline adapter A, B and C have formed a HomeplugAV Network. The user wants to remove one device (Powerline adapter A) from this network. Step 1. Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily extinguish during resetting, flash during restarting then illuminate steadily.) Step 2. Wait for the reset to complete. 22