TP-Link Archer A9 Archer A9US V6 User Guide - Page 90
Restore Interrupted Upgrade after Power Failure
View all TP-Link Archer A9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 15 Manage the Router 6. Wait a few minutes for the upgrade and reboot to complete. 15. 4. 3. Restore Interrupted Upgrade after Power Failure If your router cannot start up after an upgrade interruption due to power failure, follow the steps below to restore the interrupted upgrade. Otherwise, your router cannot work again. 1. Make sure you have the latest firmware file in your computer. If not, try another way to connect your computer to the Internet and download the latest firmware file from www.tp-link.com. 2. Connect your computer to the router with an Ethernet cable. 3. Visit 192.168.0.1 and you will see the following upgrade page. 4. Click Browse and select the downloaded firmware file. 5. Click Upgrade and wait for a few minutes until the router completes the upgrading and restarts. 15. 5. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the router. You can back up the configuration file to your computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary you can erase the current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Backup & Restore. • To back up configuration settings: Click Backup to save a copy of the current settings to your local computer. A '.bin' file of the current settings will be stored to your computer. 86