TP-Link Archer AC1900 Archer AC1900USW V1.6 Quick Installation Guide - Page 1

Quick Installation Guide AC1900 MU-MIMO Wi-Fi Router Set up with videos: Scan the QR code or visit https://www.tp-link.com/support/setup-video/#wi-fi-routers to search for the setup video of your product. Connect the Hardware If your internet comes from an Ethernet outlet, connect the router's WAN port to it, then follow Step 4 and Step 5. If you want to configure this new router as an access point to extend your network, refer to the Access Point Mode section on the back page. Unplug your modem, and remove the backup battery if it has one. Power adapter Power adapter Connect the powered-off modem to the router's WAN port with an Ethernet cable. Modem Power on the modem, and then wait about 2 minutes for it to restart. * Images may differ from actual products. Router WAN POWER Connect the power adapter to the router and turn it on. On / Off Check for the following LEDs to confirm the hardware connection, then refer to the next section to set up the internet. Power On 2.4GHz On 5GHz On Internet On Note: If the 2.4 GHz LED and 5 GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more than 5 seconds. Both the LEDs should turn solid. Flip the page over to complete network setup.