TP-Link Archer AX3000 Pro Archer AX3000 ProUS V1.6 Quick Installation Guide - Page 1
TP-Link Archer AX3000 Pro Manual
View all TP-Link Archer AX3000 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
1 Connect the Hardware Unplug the power to turn off your modem, if any, and remove the backup battery if it has one. Refer to Q5 of Need Help? to place the router for optimal Wi-Fi performance. Unplug the power Modem If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the router's 2.5 Gbps WAN/LAN port to it, then follow steps 3 and 4 to complete the hardware connection. *Image may differ from actual product. Internet 1 Connect the powered-off modem to the router's 2.5 Gbps WAN/LAN port with an Ethernet cable. Note: If you want to use the 1 Gbps WAN/LAN port as the WAN port instead, please refer to Q1 of Need Help? in this guide. 2 Power on the modem, and then wait about 2 minutes for it to restart. 3 Connect the power adapter to the router and turn it on. 4 Verify that the hardware connection is correct by checking the following LEDs. Power On 2.4 GHz On 5 GHz On Internet On Note: If the 2.4 GHz and 5 GHz LEDs are off, press and hold the WPS/Wi-Fi button on the back for more than 2 seconds. The LEDs should turn solid on. 2 Set Up the Network Method ONE: Via TP-Link Tether App 1. Download the Tether app. or Scan for Tether Tether 2. Open the Tether app and log in with your TP-Link ID. Note: If you don't have an account, create one first. 3. Tap the button in the Tether app and select Wireless Router > Standard Routers. Follow the steps to complete the setup and connect to the internet. Choose Your Device Type Wireless Router Gaming Router Range Extender To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router. Method TWO: Via a Web Browser 1. Connect your device to the router wirelessly or with an Ethernet cable. The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router. Model: Archer AX3000 AX3000 Gigabit Wi-Fi Router Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G 2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in. Note: If the login window does not appear, please refer to Q2 of Need Help? in this guide. http://tplinkwifi.net New Password: Confirm Password: Let's Get Started 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.