TP-Link Archer AX4400 Archer AX4400US V1 Quick Installation Guide - Page 1

TP-Link Archer AX4400 Manual

Get TP-Link Archer AX4400 PDF manuals and user guides View all TP-Link Archer AX4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

1 Connect the Hardware Unplug the power to turn off your modem, if any, and remove the backup battery if it has one. Place the router horizontally and orient the antennas vertically. Unplug the power Modem If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the router's WAN port to it, then follow steps 3 and 4 to complete the hardware connection. 1 Connect the powered-off modem to the router's WAN port with an Ethernet cable. Internet 2 Power on the modem, and then wait about 2 minutes for it to restart. 3 Connect the power adapter to the router and turn it on. 4 Verify that the hardware connection is correct by checking the following LEDs. Power On 2.4 GHz On 5 GHz On Internet On Note: If the 2.4 GHz LED and 5 GHz LED are off, press and hold the Wi-Fi button on the back for more than 2 seconds. Both the LEDs should turn solid on. 2 Set Up the Network Method ONE: Via TP-Link Tether App 1. Download the Tether app. or Scan for Tether Tether 2. Open the Tether app and log in with your TP-Link ID. Note: If you don't have an account, create one first. 3. Tap the button in the Tether app and select Router > Wireless Router. Follow the steps to complete the setup and connect to the internet. Choose your device type Router Gaming Router Range Extender Archer AX6000 To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router. Method TWO: Via a Web Browser 1. Connect your device to the router wirelessly or with an Ethernet cable. The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router. Model: Archer AX3000 AX3000 Gigabit Wi-Fi Router Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G 2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in. Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide. http://tplinkwifi.net New Password: Confirm Password: Let's Get Started 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.

  • 1
  • 2
Power on the modem, and then wait
about
2 minutes
for it to restart.
2
Set Up the Network
1. Connect your device to the router wirelessly
or with an Ethernet cable.
New Password:
Let’s Get Started
Confirm Password:
http://tplinkwifi.net
Method TWO: Via a Web Browser
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to
Q1
of
Need Help?
in this guide.
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
Scan for Tether
Tether
or
Choose your device type
Gaming Router
Range Extender
Router
Archer AX6000
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the
button in the Tether app and
select Router > Wireless Router. Follow
the steps to complete the setup and
connect to the internet.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
2
Connect the power adapter to
the router and turn it on.
3
Connect the Hardware
Note: If the 2.4 GHz LED and 5 GHz LED are off, press and hold the Wi-Fi button on the back for more than 2 seconds.
Both the LEDs should turn solid on.
Power
On
Internet
On
2.4 GHz
On
5 GHz
On
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s
WAN port
to it, then follow steps 3 and 4 to complete the hardware connection.
Unplug the power
to turn off your modem, if any, and remove
the backup battery if it has one.
Place the router horizontally and orient the antennas vertically.
Modem
Unplug the power
Verify that the hardware connection is correct by checking the following LEDs.
4
1
Internet
1
Connect the
powered-off
modem to the router’s
WAN
port with an Ethernet
cable.