TP-Link Archer AXE5400 Archer AXE5400USW V1.6 User Guide - Page 13
powered-off modem, WAN port, minutes, Method 1: Wired, Method 2: Wirelessly
View all TP-Link Archer AXE5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 2 Internet Connect the Hardware 1 2 3 1. Connect the powered-off modem to the router's WAN port with an Ethernet cable. 2. Turn on the modem, and then wait about 2 minutes for it to restart. 3. Connect the power adapter to the router and turn on the router. 4. Verify that the hardware connection is correct by checking the following LEDs. Power On 2.4 GHz On 5 GHz On 6 GHz On Internet On Note: If the 2.4 GHz, 5 GHz, and 6 GHz LEDs are off, press and hold the Wi-Fi button on the back for more than 2 seconds. These LEDs should turn solid on. 5. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSIDs (Network Names) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. 9