TP-Link Archer BE550 Archer BE550US V1.6 User Guide - Page 119
How can I do that?, subnet. Disable Router B's DHCP function.
![]() |
View all TP-Link Archer BE550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 16 Customize Your Network Settings *Image may differ from your actual product. Router A Router B Company's server LAN: 192.168.0.1 Switch WAN: 172.30.30.100 LAN: 192.168.0.2 172.30.30.1 PC 192.168.0.100 How can I do that? 1. Change the routers' LAN IP addresses to two different IP addresses on the same subnet. Disable Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Advanced > Network > Routing. 4. Click Add and finish the settings according to the following explanations: Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of Router A. In the example, the IP address of the company network is the destination IP address, so here enter 172.30.30.1. Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination 115
![](/manual_guide/products/tplink-archer-be550-archer-be550us-v16-user-guide-2131e3f/119.png)