TP-Link Archer C2 Archer C2 V1 Quick Install Guide - Page 1

Quick Installation Guide AC750 Wireless Dual Band Gigabit Router 7106505275 REV3.0.0 Connecting the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, then follow steps 4 and 5 to complete the hardware connection. Internet Power adapter Modem Router 1 Turn o the modem, and remove the backup battery if it has one. 2 Connect the modem to the Internet port on your router with an Ethernet cable. 3 Turn on the modem and then wait about 2 minutes for it to restart. Power adapter 4 Turn on the router. 5 Verify that the hardware connection is correct by checking these LEDs. Power On 2.4G/5G On Internet On Note: If the 2.4G5G LED is o , please press the Wireless button on the rear panel for 2 seconds, then check the LEDs again in a few seconds.