TP-Link Archer C3150 Archer C3150 V1 Quick Install Guide - Page 1

Quick Installation Guide AC3150 Wireless Dual Band Gigabit Router 7106505715 REV1.0.0 Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, then follow steps 5 and 6 to complete the hardware connection. Internet Modem Power adapter 1 Install the antennas. Router 2 Turn off the modem, and remove the backup battery if it has one. 3 Connect the modem to the Internet port on your router with an Ethernet cable. 4 Turn on the modem, and then wait about 2 minutes for it to restart. Power adapter 5 Turn on the router. 6 Verify that the following LEDs are on and solid before continuing with the configuration. Power 2.4G 5G Internet On On On On Note: If the 2.4G LED and 5G LED are off, please press the Wi-Fi On/Off button on the side panel for 2 seconds and check the LEDs again a few seconds later. For optimum performance, orient the four antennas as shown in the drawing below. 30° 30°