TP-Link Archer C50 Archer C50 V1 Quick Install Guide - Page 1
TP-Link Archer C50 Manual
View all TP-Link Archer C50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Installation Guide AC1200 Wireless Dual Band Router 7106505390 REV1.0.1 Connecting the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, then follow steps 4 and 5 to complete the hardware connection. Internet Power adapter Modem Router 1 Turn o the modem, and remove the backup battery if it has one. 2 Connect the modem to the Internet port on your router with an Ethernet cable. 3 Turn on the modem, and then wait about 2 minutes for it to restart. Power adapter 4 Turn on the router. 5 Verify that the hardware connection is correct by checking these LEDs. Power 2.4G 5G Internet On On On On Note: If the 2.4G LED and 5G LED are o , please press the Wi-Fi button on the rear panel for 2 seconds, then check the LEDs again in a few seconds.